You’re tired of listening to cassettes and only having the capacity to enjoy the radio, while your smart phone is filled with your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve created this article content to help you, because right now you’re going to learn about how to install a car radio on your Honda Pilot. To do this, first of all we will find out how to remove the old car radio, then how to install a car radio on Honda Pilot and finally, how to connect it.
How to install car radio on Honda Pilot: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Honda Pilot, there is one necessary task, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two ways based on the stereo that equips your Honda Pilot:
- Original car radio:
In this instance, you’ll have to be persistent, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Honda Pilot. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the method is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Honda Pilot: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Honda Pilot. Beforehand, take the time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Honda Pilot, once positioned, be sure you press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Honda Pilot, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Honda Pilot, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To get more tips on the Honda Pilot, take a look at the Honda Pilot category.
