If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle at fault – your headlights, also named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Peugeot 107? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 107.
Why adjust the headlights of your Peugeot 107?
So let’s start our article with the benefit of adjusting the headlights of your Peugeot 107. For the majority of us, our headlights are adjusted good enough, and they appear to light up enough during the night. Regrettably this is not constantly the case and examining this setting, either because the headlights on your Peugeot 107 are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Peugeot 107 for safety
First of all, the headlight adjustment of a Peugeot 107 must be done for a basic security motive. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Peugeot 107 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot 107 for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 107?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Peugeot 107? This adjustment may seem a bit complicated, but by simply following the guidelines you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a Peugeot 107
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 107
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Peugeot 107 (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Peugeot 107 is coherent, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Peugeot 107, please read our article on this subject.
In the event that you have any further questions about the Peugeot 107, do not hesitate to consult our Peugeot 107 category.
