Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle guilty – your headlights, also called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Mitsubishi Outlander? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mitsubishi Outlander.
Why adjust the headlights of your Mitsubishi Outlander?
So let’s begin our content page with the interest of adjusting the headlights of your Mitsubishi Outlander. For most of us, our headlights are adjusted well enough, and they seem to light up enough during the night. However this is not always the circumstance and looking at this setting, either because the headlights on your Mitsubishi Outlander are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Mitsubishi Outlander for safety
To begin with, the headlight adjustment of a Mitsubishi Outlander must be finished for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Mitsubishi Outlander . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mitsubishi Outlander for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mitsubishi Outlander?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Mitsubishi Outlander? This adjustment might seem a bit difficult, but by simply following the recommendations you should have the ability to complete it without too much issue.
Preparations to adjust the headlights of a Mitsubishi Outlander
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mitsubishi Outlander
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Mitsubishi Outlander (they are in general marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Mitsubishi Outlander is coherent, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Mitsubishi Outlander, please browse our content page on this subject matter.
If you have any additional questions about the Mitsubishi Outlander, do not hesitate to consult our Mitsubishi Outlander category.
