If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle guilty – your headlights, also often known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Mercedes Benz Sprinter? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mercedes Benz Sprinter.
Why adjust the headlights of your Mercedes Benz Sprinter?
So let’s begin our content page with the interest of adjusting the headlights of your Mercedes Benz Sprinter. For many people, our headlights are adjusted well enough, and they appear to light up enough through the night. However this is not constantly the circumstance and examining this setting, either because the headlights on your Mercedes Benz Sprinter are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Mercedes Benz Sprinter for safety
First of all, the headlight adjustment of a Mercedes Benz Sprinter must be achieved for a simple safety reason. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Mercedes Benz Sprinter . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mercedes Benz Sprinter for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mercedes Benz Sprinter?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Mercedes Benz Sprinter? This adjustment may seem a bit complex, but by simply following the recommendations you should have the ability to complete it without too much concern.
Preparations to adjust the headlights of a Mercedes Benz Sprinter
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mercedes Benz Sprinter
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Mercedes Benz Sprinter (they are in general designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Mercedes Benz Sprinter is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Mercedes Benz Sprinter, please read our content page on this subject matter.
In the event that you have any further questions about the Mercedes Benz Sprinter, do not hesitate to consult our Mercedes Benz Sprinter category.
