Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to take responsibility – your headlights, also named high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Land Rover Defender? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Land Rover Defender.
Why adjust the headlights of your Land Rover Defender?
So let’s start our article with the interest of adjusting the headlights of your Land Rover Defender. For most of us, our headlights are adjusted well enough, and they seem to light up enough at night. Sadly this is not always the circumstance and checking this setting, either because the headlights on your Land Rover Defender are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Land Rover Defender for safety
To begin with, the headlight adjustment of a Land Rover Defender must be carried out for a simple safety reason. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Land Rover Defender . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Land Rover Defender for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Land Rover Defender?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Land Rover Defender? This setting might seem a bit complicated, but by following the instructions you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Land Rover Defender
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Land Rover Defender
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Land Rover Defender (they are in general designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Land Rover Defender is logical, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Land Rover Defender, please go through our article on this subject matter.
If you have any further questions about the Land Rover Defender, do not hesitate to consult our Land Rover Defender category.
