If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to blame – your headlights, as well named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Hyundai Ix20? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Hyundai Ix20.
Why adjust the headlights of your Hyundai Ix20?
So let’s start our article with the interest of adjusting the headlights of your Hyundai Ix20. For many of us, our headlights are adjusted well enough, and they seem to light up enough at night. However this is not constantly the case and looking at this setting, either because the headlights on your Hyundai Ix20 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Hyundai Ix20 for safety
To begin with, the headlight adjustment of a Hyundai Ix20 must be achieved for a very easy safety explanation. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Hyundai Ix20 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Hyundai Ix20 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Hyundai Ix20?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Hyundai Ix20? This setting may seem a bit difficult, but by following the instructions you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Hyundai Ix20
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Hyundai Ix20
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Hyundai Ix20 (they are in most cases designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Hyundai Ix20 is coherent, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Hyundai Ix20, please browse our article on this subject.
If you wish more guides on the Hyundai Ix20, go to our Hyundai Ix20 category.
