If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car guilty – your headlights, also identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Honda Fit? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Honda Fit.
Why adjust the headlights of your Honda Fit?
So let’s begin our content with the benefit of adjusting the headlights of your Honda Fit. For many people, our headlights are adjusted sufficiently, and they seem to light up enough after dark. However this is not constantly the circumstance and checking this setting, either because the headlights on your Honda Fit are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Honda Fit for safety
First of all, the headlight adjustment of a Honda Fit must be achieved for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Honda Fit . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Honda Fit for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Honda Fit?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his Honda Fit? This setting may seem a bit difficult, but by simply following the guidance you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Honda Fit
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Honda Fit
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Honda Fit (they are in most cases marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Honda Fit is logical, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Honda Fit, please read our content on this subject matter.
If perhaps you have any further questions about the Honda Fit, do not hesitate to consult our Honda Fit category.
