Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car to take responsibility – your headlights, also named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Dodge Journey? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Dodge Journey.
Why adjust the headlights of your Dodge Journey?
So let’s begin our article with the benefit of adjusting the headlights of your Dodge Journey. For many of us, our headlights are adjusted good enough, and they appear to light up enough at nighttime. However this is not constantly the circumstance and checking this setting, either because the headlights on your Dodge Journey are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Dodge Journey for safety
First of all, the headlight adjustment of a Dodge Journey must be achieved for a basic security reason. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Dodge Journey . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Dodge Journey for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Dodge Journey?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Dodge Journey? This adjustment may appear a bit difficult, but by following the instructions you should have the ability to complete it without too much issue.
Preparations to adjust the headlights of a Dodge Journey
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Dodge Journey
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Dodge Journey (they are in general designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Dodge Journey is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Dodge Journey, please read our article on this subject matter.
If you wish more tutorials on the Dodge Journey, go to our Dodge Journey category.
