If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle responsible – your headlights, as well called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Dodge Challenger? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Dodge Challenger.
Why adjust the headlights of your Dodge Challenger?
So let’s begin our content with the benefit of adjusting the headlights of your Dodge Challenger. For most of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Sadly this is not constantly the circumstance and examining this setting, either because the headlights on your Dodge Challenger are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Dodge Challenger for safety
To begin with, the headlight adjustment of a Dodge Challenger must be finished for a basic security reason. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Dodge Challenger . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Dodge Challenger for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Dodge Challenger?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Dodge Challenger? This setting may seem a bit complex, but by simply following the instructions you should be able to perform it without too much trouble.
Preparations to adjust the headlights of a Dodge Challenger
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Dodge Challenger
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Dodge Challenger (they are in most cases designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Dodge Challenger is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Dodge Challenger, please browse our content on this subject matter.
If you wish more tutorials on the Dodge Challenger, go to our Dodge Challenger category.
