If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle to blame – your headlights, as well called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Chevrolet Tahoe? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Tahoe.
Why adjust the headlights of your Chevrolet Tahoe?
So let’s begin our content page with the interest of adjusting the headlights of your Chevrolet Tahoe. For most of us, our headlights are adjusted well enough, and they seem to light up enough at night. However this is not constantly the circumstance and checking this setting, either because the headlights on your Chevrolet Tahoe are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Chevrolet Tahoe for safety
To begin with, the headlight adjustment of a Chevrolet Tahoe must be made for a basic security explanation. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Chevrolet Tahoe . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Tahoe for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Tahoe?
We will now go forward to the part that concerns you the most in this post, how to adjust the headlights of his Chevrolet Tahoe? This setting might seem a bit difficult, but by following the recommendations you should be able to do it without too much concern.
Preparations to adjust the headlights of a Chevrolet Tahoe
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Tahoe
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Chevrolet Tahoe (they are in most cases marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Chevrolet Tahoe is coherent, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Tahoe, please browse our content page on this subject matter.
In the event that you have any further questions about the Chevrolet Tahoe, do not hesitate to consult our Chevrolet Tahoe category.
