If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle to take responsibility – your headlights, also identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Cadillac SRX? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Cadillac SRX.
Why adjust the headlights of your Cadillac SRX?
So let’s start our content with the interest of adjusting the headlights of your Cadillac SRX. For many of us, our headlights are adjusted well enough, and they seem to light up enough after dark. Sadly this is not constantly the case and checking this setting, either because the headlights on your Cadillac SRX are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Cadillac SRX for safety
To begin with, the headlight adjustment of a Cadillac SRX must be done for a very easy security explanation. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Cadillac SRX . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Cadillac SRX for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Cadillac SRX?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Cadillac SRX? This adjustment may seem a bit difficult, but by simply following the guidance you should have the ability to accomplish it without too much trouble.
Preparations to adjust the headlights of a Cadillac SRX
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Cadillac SRX
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Cadillac SRX (they are in most cases marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Cadillac SRX is coherent, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Cadillac SRX, please browse our content on this subject.
To discover more tips on the Cadillac SRX, take a look at the Cadillac SRX category.
