If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car guilty – your headlights, also identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Cadillac CTS? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Cadillac CTS.
Why adjust the headlights of your Cadillac CTS?
So let’s begin our content with the benefit of adjusting the headlights of your Cadillac CTS. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Unfortunately this is not always the circumstance and looking at this setting, either because the headlights on your Cadillac CTS are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Cadillac CTS for safety
To begin with, the headlight adjustment of a Cadillac CTS must be carried out for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Cadillac CTS . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Cadillac CTS for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Cadillac CTS?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Cadillac CTS? This setting may seem a bit complex, but by following the instructions you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Cadillac CTS
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Cadillac CTS
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Cadillac CTS (they are usually designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Cadillac CTS is coherent, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Cadillac CTS, please browse our content on this subject matter.
If you have any additional questions about the Cadillac CTS, do not hesitate to consult our Cadillac CTS category.
