Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle responsible – your headlights, also called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Acura MDX? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Acura MDX.
Why adjust the headlights of your Acura MDX?
So let’s begin our content page with the benefit of adjusting the headlights of your Acura MDX. For many people, our headlights are adjusted well enough, and they seem to light up enough during the night. Regrettably this is not always the circumstance and examining this setting, either because the headlights on your Acura MDX are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Acura MDX for safety
First of all, the headlight adjustment of a Acura MDX must be made for a basic security reason. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. However, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Acura MDX . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Acura MDX for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Acura MDX?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Acura MDX? This adjustment might seem a bit difficult, but by simply following the guidelines you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Acura MDX
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Acura MDX
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Acura MDX (they are in general designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Acura MDX is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Acura MDX, please browse our content page on this subject.
If you need more tutorials on the Acura MDX, go to our Acura MDX category.
