If you’re a bit of a do-it-yourselfer, you’re most certainly keen to manage the majority of the work to be completed on your Mercedes Classe B 3, but some are more challenging than others and require the removal of body parts or components to access the part you want to work on. We want to help you in this task. That’s why on this web page we are going to discover how to remove the bumper from a Mercedes Classe B 3. This procedure is not very challenging and you should have the ability to do it with few tools. To do so , first we will discover how to remove the front bumper of your Mercedes Classe B 3, then how to remove the rear bumper of this one.

remove-bumper-mercedes-classe-b-3

How to remove the front bumper from a Mercedes Classe B 3

So let’s begin our content with the front bumper of your Mercedes Classe B 3. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to adhere to in order to disassemble the bumper of your Mercedes Classe B 3 in good conditions:

  • If you want to be more comfortable, we recommend you to put your Mercedes Classe B 3 on stands and to remove the front wheels to have a perfect access to the whole front bumper.
  • Open the bonnet of your motor vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Take out the wheel arches: They’re also identified as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Mercedes Classe B 3. Dependant on your automobile features and the year of your model, you will also have the ability to find staples, to get this done, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is behind your mudguard and that seals the front bumper of your Mercedes Classe B 3 on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
  • Now it’s time to go below your Mercedes Classe B 3 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
  • Make sure to unplug the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Mercedes Classe B 3, to put it back in place adhere to the steps in the opposite way.

How to remove the rear bumper from a Mercedes Classe B 3

And to conclude, even if the process is quite equivalent, we will check out the case of removing the rear bumper from your Mercedes Classe B 3. For each stage to avoid repeating ourselves we will only give you the broad highlights, refer to part 1 if you have any concerns or questions for more information.

  • Start by carrying out the same first stage, that is, lift your Mercedes Classe B 3 and remove your rear wheels in order to have an ideal working space to remove the bumper of your Mercedes Classe B 3 without trouble
  • Remove the rear wheel arches of your Mercedes Classe B 3 to access the side bumper side brackets
  • Open your trunk
  • Take out the side brackets in your wheel arches to make it less complicated to remove the bumper from your Mercedes Classe B 3.
  • Take away the lower bindings underneath your Mercedes Classe B 3.
  • Simultaneously, remember to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Mercedes Classe B 3, adhere to the same operation as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a Mercedes Classe B 3 whether it is the front one or the rear one the techniques are more or less the same and it is enough to be meticulous to make everything go well.

If you have any additional questions about the Mercedes Classe B 3, do not hesitate to consult our Mercedes Classe B 3 category.