Recent cars all come with an incredible quantity of features, however, because of your budget or the year of your Opel Mokka, you may not be sufficiently lucky to have them all. In this article we’re gonna help you correct this trouble by telling you how to install parking sensor on my Opel Mokka? In fact, this feature is extremely practical, especially if you live in the city and have to park your car regularly in narrow parking areas. To help you out, we’ll first view how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Opel Mokka, and to conclude, how much does a parking sensor cost?
How does parking sensors work on an Opel Mokka?
So we start with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature permits you to know the distance between the back of your Opel Mokka and an obstacle when you move back. It is as a result extremely legitimate for persons who have to maneuver frequently, whose visibility is poor, or whose vehicle size is big.
Frequently fitted as standard, the reverse sensors of a Opel Mokka incorporate a kit of sensors (minimum 4) that will be turned on with reverse gear and will spot obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will rise in strength with the proximity of the obstacle and sometimes a visual indicator in complement. The reversing radars of a Opel Mokka will enable you for parking, but also for safety and avoiding pedestrians.
How to install parking sensors on a Opel Mokka?
We now proceed to the section that you are most certainly most focused on, installing reverse parking sensors on a Opel Mokka. This section is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Opel Mokka.
How to replace a broken backup sensors on a Opel Mokka
First we’ll see how to replace a broken parking sensor on an Opel Mokka. In cases where your Opel Mokka has suffered a rear shock and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to let the system to function effectively. Thankfully for you this operation is particularly simple, you can even carry it out yourself without any particular mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take off the broken parking sensor from your Opel Mokka, this part is very intuitive, it is only clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working effectively.
- You will only need to adhere to the installation recommendations, but we summarize here the main steps.
- Take off the bumper if you don’t have access to the inside of it.
- Think about the ideal placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it all out.
- Stick to the installation manual which is accessible with some electrical bases.
- Determine the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Try it all out.
How to install an aftermarket parking sensor kit on an Opel Mokka
Now we advance to the section you’re likely most focused on, how to install a reverse sensor set up on a Opel Mokka that doesn’t have one? As we revealed earlier on, you’re lucky because many of OEMs now sell automotive aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this part. It is imperative to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Opel Mokka for the set up, do not be reluctant to read our content page on this subject matter to learn the process to follow. If you don’t feel like it, you can call a professional, the task should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Opel Mokka
And to conclude, we will now present you the installation of a drill-free parking sensors system on a Opel Mokka. There are two kind, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take out. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Opel Mokka?
Price of changing a broken reversing parking sensor for an Opel Mokka
The replacement of a destroyed reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is important to count about one hundred euros for the installation of the kit by a professional.
Price of an ultrasonic parking sensors with drilling for Opel Mokka
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high class kit.
Price of a parking sensors kit without drilling for a Opel Mokka
.
At last, for the price of a reversing radar without drilling for your Opel Mokka, whatever type you go for, you will have to pay between 30 and 60 euros.
If you wish more tutorials on the Opel Mokka, go to our Opel Mokka category.
