Recent cars all come with an impressive amount of features, however, because of your budget or the year of your Mercedes Classe G 3, you may not be lucky enough to have them all. In this article we’re gonna help you solve this issue by showing how to install parking sensor on my Mercedes Classe G 3? In reality, this option is very helpful, particularly if you live in the city and have to park on the regular basis in narrow parking areas. To help you out, we’ll first look at how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Mercedes Classe G 3, and finally, how much does a parking sensor cost?
How does parking sensors function on an Mercedes Classe G 3?
So we start with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting option allows you to know the distance between the back of your Mercedes Classe G 3 and an obstacle when you move back. It is as a result extremely honest for persons who have to maneuver regularly, whose visibility is poor, or whose car size is large.
Often times fitted as standard, the reverse sensors of a Mercedes Classe G 3 incorporate a set of sensors (minimum 4) that will be activated with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will increase in level with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Mercedes Classe G 3 will enable you for parking, but as well for security and staying away from pedestrians.
How to install parking sensors on a Mercedes Classe G 3?
We now move on to the step that you are likely most focused on, installing reverse parking sensors on a Mercedes Classe G 3. This part is for you if you don’t have a standard reserve sensor set up and you still desire to take advantage of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Mercedes Classe G 3.
How to replace a broken backup sensors on a Mercedes Classe G 3
First we’ll see how to replace a broken parking sensor on an Mercedes Classe G 3. If it turns out your Mercedes Classe G 3 has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to allow the system to function properly. Thankfully for you this operation is really simple, you can even make it out yourself without any particular mechanical skill:
- Get a replacing radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take out the damaged parking sensor from your Mercedes Classe G 3, this part is very intuitive, it is just clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working properly.
- You will only need to follow the installation recommendations, but we summarize here the main procedures.
- Take out the bumper if you don’t have access to the inside of it.
- Think about the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Test it all out.
- Adhere to the installation manual which is accessible with some electrical knowledges.
- Find the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an Mercedes Classe G 3
Now we proceed to the part you’re most likely most focused on, how to install a reverse sensor set up on a Mercedes Classe G 3 that doesn’t have one? As we said early on, you’re lucky because a good number of OEMs now deal automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this part. It is imperative to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Mercedes Classe G 3 for the set up, do not be reluctant to consult our content page on this subject to learn the method to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Mercedes Classe G 3
And finally, we will now present you the installation of a drill-free parking sensors system on a Mercedes Classe G 3. There are two types, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Mercedes Classe G 3?
Price of swapping a broken reversing parking sensor for an Mercedes Classe G 3
The replacement of a destroyed reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is important to count around one hundred euros for the installation of the kit by a specialist.
Price of an ultrasonic parking sensors with drilling for Mercedes Classe G 3
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality system.
Price of a parking sensors kit without drilling for a Mercedes Classe G 3
.
To finish, for the price of a reversing radar without drilling for your Mercedes Classe G 3, whatever type you select, you will have to pay among 30 and 60 euros.
If you need more tutorials on the Mercedes Classe G 3, go to our Mercedes Classe G 3 category.
