Regardless whether you feel you can’t see as well during the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Although this adjustment may look easy thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this basic manipulation, and in this content page, we will find out how to adjust the low beam lights of your Toyota Land Cruiser Serie 150? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Land Cruiser Serie 150.
Why set the low beam lights of your Toyota Land Cruiser Serie 150?
So let’s start our content page with the point of adjusting the low beam lights of your Toyota Land Cruiser Serie 150. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and verifying this setting, either because the low beams of your Toyota Land Cruiser Serie 150 are not lighting up well, or because you have the feeling that they are too low or too powerful is a good idea .
Adjusting the low beam of your Toyota Land Cruiser Serie 150 for security is a good idea.
First of all, the adjusting of the dipped headlights of an Toyota Land Cruiser Serie 150 must be done for a simple security purpose. Whether it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Land Cruiser Serie 150 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Land Cruiser Serie 150?
We will now go forward to the part that concerns you the most in this content page, how to adjust the low beams of his Toyota Land Cruiser Serie 150? This setting may sound a bit complex, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Toyota Land Cruiser Serie 150
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Land Cruiser Serie 150
Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Toyota Land Cruiser Serie 150 (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Toyota Land Cruiser Serie 150 is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Toyota Land Cruiser Serie 150, please go through our content page on this subject.
Whenever you have any additional questions about the Toyota Land Cruiser Serie 150, do not hesitate to consult our Toyota Land Cruiser Serie 150 category.
