Your car’s handbrake is a mandatory security feature according to the highway code, in fact , this aims to stop your Audi Sq5, even on a slight slope. It must be in addition to the main brake controls. It is possible that as time passes the wire system of the hand brake will loosen up and you will not pass the technical control or you may feel that it truly is no longer blocking your car. To cope with these problems, we will look at how to adjust the hand brake on your Audi Sq5 . To achieve this, first we will see the adjustment of your manual handbrake on Audi Sq5 , after that, in a second step, how to adjust an automatic handbrake, and lastly the price of the service performed by a professional.
Adjusting a manual handbrake on Audi Sq5?
Thus we start off our document with the hand brake adjustment of a Audi Sq5 in its manual version. This kind of version works in a basic way using a system of wire and screws that allow you to control the tension with the device and therefore to modify the stroke with the lever of your handbrake. To act on it you will need to act on these screws to be able to stretch out the handbrake cable of your Audi Sq5 . In any case, before adjusting the hand brake, you must check that your rear wheels aren’t blocked throughout the adjustment. Please find below the detailed process to carry out this intervention:
- At the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once done, you should see a trapdoor on your handbrake, open it up to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to change the cable stress.
- Now screw on the lock nuts about both sides, be sure to make the same changes on both sides to hold a balanced braking, and check that the hand brake handle of your Audi Sq5 has a stroke of about three notches.
- Tighten up the locknuts and test the locking of the tires of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get a great ideal configuration
.
If you don’t have access to the handbrake flap of your Audi Sq5, the adjustment will be exactly the same but it will be done by passing underneath your car on the level of your handbrake handle. Make sure to put your car on the stand before any actions.
How do I adjust the automatic handbrake of my personal Audi Sq5?
Second system of handbrake adjustment about Audi Sq5 , this is an automatic handbrake, unlike the manual one, that one is done upon the brake drums or perhaps calipers, and it is imagined to change automatically for the wear of your brake shoes or pads. It may be that if you quickly have to purchase brake pads, your handbrake will lose power, listed below are the steps to consider to examine if the strain of your handbrake is the right one:
- Bear in mind that an automatic handbrake can’t be modified directly because it is meant to adapt by itself to the use of the pads or shoes of your Audi Sq5.
- You can even now examine that the system is operating effectively by putting the automobile on the stand and checking by driving under the auto that the pads are still in good working order.
- For drum brakes will probably be required to disassemble the tires to examine the state of the shoes, all of us advise you to have it carried out by a specialist.
- Make sure to replace your pads if you need to.
What is the price of adjusting the handbrake of Audi Sq5 by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it issues a safety component of your car, namely the adjustment with the handbrake of your Audi Sq5 , we counsel you to go to a mechanic who can adjust your handbrake for your about fifty local currency . For those who have problems with vibrations when braking on Audi Sq5, do not think twice to refer to our document which relates to this issue.
To find more tips on the Audi Sq5, take a look at the Audi Sq5 category.
