It doesn’t matter if it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are always functional is extremely important. In reality, bulbs are wearing parts that will inevitably burn out with time and as a result need to be swapped out. You’re probably here because one of your position lamp is burnt out and you’re wondering how to change the bulb of my GMC Yukon XL parking light, we’ve written this content to help you do this procedure on your own and not need to go to your repair shop. In a first part, we will look at changing the front daytime running light bulb of your car and in a second section, how to change the rear daytime running light.

change-parking-light-gmc-yukon-xl

How to change the front parking light bulb of my GMC Yukon XL?

We will start this article with replacing the front daytime running light bulb of your GMC Yukon XL, bear in mind that according to the year and finish of your car it may not be quite the same methodology to use. In reality, even if the position of your bulb is not going to change, the access may be more or less complex based on the features of your car.

First methodology, we will perform the bulb swap of your daytime running light without taking out the headlight of your GMC Yukon XL. Although this approach is the most basic, it is not guaranteed that you will be in a position to accomplish it on your automobile without encumbrance. In reality, based on the versions and the year, on some models there will not be enough space for you to change the bulb like this. Here are the two different solutions to change the bulb of the front parking light of your GMC Yukon XL:.

  • Going through the bonnet of your car: First solution, you will only go through the bonnet of your automobile to direct access your headlight unit. This is the most wise approach but it is not always easy to achieve, sometimes because of secondary parts that will block your access. To accomplish this, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been completed, you will need to access the back of your headlight unit to change the daytime running light bulb on your GMC Yukon XL. You may perhaps need to take out the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take out the bulb socket from its area. To accomplish this, pull gently on the socket and not on the wires (you risk damaging them), at last once the socket is out, you can change your parking lamps bulb, being cautious not to damage the wires and use a cloth to avoid dirtying your new bulb. Once finished, reassemble the system, reconnect your battery and do a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second option, you can remove the headlight of your GMC Yukon XL if it turns out the access through the engine block seems too difficult. To do this, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these steps are achieved you will simply have to stick to the same technique as on the previous part to change the front daytime running light bulb of your GMC Yukon XL

.

How to change the rear parking light bulb on your GMC Yukon XL

To finish , if you need to change the rear parking light bulb of your GMC Yukon XL the method is less difficult, here are the different basic steps to stick to to allow you to change this bulb:

  • Unplug your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Insert your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Check that your parking lights are operating correctly again before you set off again and you’re done. If you want to change the fog light bulb on your GMC Yukon XL, please go through our dedicated article to find out how to do it.

To discover more tips on the GMC Yukon XL, take a look at the GMC Yukon XL category.