Regardless you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your car to blame – your low beams. Even though this correction may seem to be easy thanks to the thumbwheel on your dashboard, a full correction is much more technical than this common realignment, and in this article, we will find out how to adjust the low beam lights of your Chevrolet Cobalt? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Cobalt.
Why adjust the low beam lights of your Chevrolet Cobalt?
So let’s commence our article with the benefit of adjusting the low beam lights of your Chevrolet Cobalt. For many people these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and checking this setting, either because the low beams of your Chevrolet Cobalt are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good idea .
Adjusting the low beam of your Chevrolet Cobalt for safety is a good idea.
First of all, the adjusting of the dipped headlights of an Chevrolet Cobalt must be done for a elementary safety reason. Regardless whether it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Cobalt for legal justifications
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Cobalt?
We will now go forward to the section that interests you the most in this article, how to adjust the low beams of his Chevrolet Cobalt? This setting may seem to be a bit difficult, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Chevrolet Cobalt
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Cobalt
Once your car is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Chevrolet Cobalt (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Chevrolet Cobalt is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Chevrolet Cobalt, please go through our article on this subject.
If you wish more tutorials on the Chevrolet Cobalt, go to our Chevrolet Cobalt category.
