We will try again in this article to help you to solve the small problems related to your motor vehicle. We have recently seen how to unblock a fuel door, or a tank cap, in this article we will look into an annoying issue that can be dangerous in bad weather conditions, being a victim of wiper stuck on Ram ProMaster City . And to remedy this, we will first try to figure out why the wipers on your Ram ProMaster City remain stuck and, secondly, how to unblock them.

wiper-stuck-ram-promaster-city

Why does the wiper of my Ram ProMaster City stay stuck?

So we will begin our article with the explanations of the stuck wipers of your Ram ProMaster City . First of all we will look into the front wipers and in a second time on the rear wiper.

Why are the front wipers on my Ram ProMaster City stuck in up or down position?

We will go through one after the other the different problems that can bring about the front wipers of your Ram ProMaster City to get stuck :

  • One of the most basic motives of front wipers getting stuck on your Ram ProMaster City is related to the engine unit that drives them, in reality, these engines can, with time, lose power, and eventually need to be changed. You should find out before the total blockage of your windshield wipers that they work much slower.
  • Less basic, but it can still happen, is that your front wiper blades are blocked because of an object that prevents the blades from functioning, have a look up to the axis of the blades.
  • If it is a lack of lubrication, you will discover that your front wipers are going slower, check fairly quickly the cause of the trouble or else the engines will be forced and damaged.
  • It is possible that the front wipers of your Ram ProMaster City may not operate because of a defective comodo. To test this, you need to disconnect the output wires and connect them together, if the wipers are functioning, the comodo is responsible for the problem.
  • Finally, last opportunity, the front wipers of your Ram ProMaster City are blocked because of a power failure, so you will have to check two parts, the relay and the fuse.

Why is the rear window wiper on my Ram ProMaster City stuck?

Concerning the stuck rear window wiper of your Ram ProMaster City , the origins of your problems are more or less the same. Although there is just one wiper blade at the rear of your motor vehicle, there are still some dedicated parts that can bring about problems just on the rear windshield of your Ram ProMaster City. So, remember to conduct the same investigations as seen in the previous part of this article.

What can I do to unlock the wiper on my Ram ProMaster City?

At last, for this second section, we will see what solutions are available to you to make sure that the wipers on your Ram ProMaster City are unlocked and that they operate properly again.

How to unlock the wipers of my Ram ProMaster City?

Whether it is for the front windshield wipers or the rear windshield wiper, the solutions will be the same and we will detail them one after the other in this part, it is up to you to adapt them to the part that concerns you. If you have other blocking problems such as a fuel door stuck on Ram ProMaster City, do not think twice to consult our article on this issue.

  • In such a case, you will have to locate the engine unit, then disconnect the power cables of this one (be careful there must be several of them related to the different speeds of sweeping), then remove the brushes and the linkage. At last, you will have to unscrew these anchoring points which are generally fixed on silentblocks and reassemble a new wiper motor on your Ram ProMaster City
  • .

  • In this scenario, it will be quite very easy but expensive to change your commodo, the part generally costs around 200€, once tested you will be able to disassemble your commodo by removing the cover from the back of the steering wheel then disconnecting it and removing it with the fixing screws, you will just have to reassemble the new one.
  • Ram ProMaster City wiper blocked because of a power failure: In this last scenario, you will have to locate the source of the failure (fuse or relay) and replace the defective part

.

If you need more guides on the Ram ProMaster City, go to our Ram ProMaster City category.