We will try again in this article to help you to remedy the small complications associated with your car. We have not too long ago discovered how to unblock a fuel door, or a tank cap, in this article we will concentrate on an irritating issue that can be dangerous in bad climate conditions, being a victim of wiper stuck on Mercury Milan . And to answer this, we will first try to figure out why the wipers on your Mercury Milan remain stuck and, secondly, how to unblock them.

wiper-stuck-mercury-milan

Why does the wiper of my Mercury Milan stay stuck?

So we will begin our content page with the reasons of the stuck wipers of your Mercury Milan . To begin with we will concentrate on the front wipers and in a second time on the rear wiper.

Why are the front wipers on my Mercury Milan stuck in up or down position?

We will go through one at a time the different complications that can trigger the front wipers of your Mercury Milan to get stuck :

  • One of the most common motives of front wipers getting stuck on your Mercury Milan is associated with the engine that drives them, in reality, these engines can, over time, lose power, and sooner or later need to be changed. You should find out before the total blockage of your windshield wipers that they work much slower.
  • Less common, but it can still happen, is that your front wiper blades are blocked because of an object that prevents the blades from functioning, have a look up to the axis of the blades.
  • If it is a lack of lubrication, you will find that your front wipers are going slower, check quickly the trigger of the trouble or else the engines will be forced and damaged.
  • It is possible that the front wipers of your Mercury Milan may not operate because of a faulty comodo. To evaluate this, you need to disconnect the output wires and connect them together, if the wipers are functioning, the comodo is responsible for the problem.
  • Finally, last opportunity, the front wipers of your Mercury Milan are blocked because of a power failure, so you will have to check two auto parts, the relay and the fuse.

Why is the rear window wiper on my Mercury Milan stuck?

Concerning the stuck rear window wiper of your Mercury Milan , the origins of your complications are more or less the same. Although there is only one wiper blade at the rear of your car, there are still some dedicated auto parts that can trigger complications only on the rear windshield of your Mercury Milan. So, remember to carry out the same inspections as discovered in the previous component of this content page.

What can I do to unlock the wiper on my Mercury Milan?

Finally, for this second part, we will see what solutions are available to you to make sure that the wipers on your Mercury Milan are unlocked and that they operate properly again.

How to unlock the wipers of my Mercury Milan?

If it is for the front windshield wipers or the rear windshield wiper, the solutions will be the same and we will detail them one by one in this component, it is up to you to adapt them to the component that concerns you. If you have other blocking complications such as a fuel door stuck on Mercury Milan, do not think twice to seek advice from our article on this issue.

  • In this case, you will have to identify the engine, then disconnect the power cables of this one (take care there must be several of them associated with the different speeds of sweeping), then remove the brushes and the linkage. Finally, you will have to unscrew these anchoring points which are generally fixed on silentblocks and reassemble a new wiper motor on your Mercury Milan
  • .

  • In this situation, it will be quite very easy but expensive to replace your commodo, the component generally costs around 200€, once tested you will be able to disassemble your commodo by removing the cover from the back of the steering wheel then disconnecting it and removing it with the fixing screws, you will just have to reassemble the new one.
  • Mercury Milan wiper blocked caused by a power failure: In this last situation, you will have to identify the origin of the failure (fuse or relay) and replace the faulty component

.

To discover more tips on the Mercury Milan, take a look at the Mercury Milan category.