We will try again in this article to help you to fix the small complications related to your motor vehicle. We have recently discovered how to unblock a fuel door, or a tank cap, in this article we will concentrate on an annoying problem that can be dangerous in bad climate conditions, being a victim of wiper stuck on Mercedes Cla . And to answer this, we will first try to discover why the wipers on your Mercedes Cla remain stuck and, secondly, how to unblock them.

wiper-stuck-mercedes-cla

Why does the wiper of my Mercedes Cla stay stuck?

So we will start our content with the explanations of the stuck wipers of your Mercedes Cla . To begin with we will concentrate on the front wipers and in a second time on the rear wiper.

Why are the front wipers on my Mercedes Cla stuck in up or down position?

We will proceed through one after the other the different complications that can bring about the front wipers of your Mercedes Cla to get stuck :

  • One of the most common motives of front wipers getting stuck on your Mercedes Cla is related to the engine that drives them, in fact, these engines can, over time, lose power, and eventually need to be changed. You should notice before the total blockage of your windshield wipers that they work much slower.
  • Less common, but it can still happen, is that your front wiper blades are blocked as a result of an object that prevents the blades from functioning, take a look up to the axis of the blades.
  • If it is a lack of lubrication, you will locate that your front wipers are going slower, verify fairly quickly the trigger of the problems or else the engines will be forced and damaged.
  • It is possible that the front wipers of your Mercedes Cla may not work as a result of a faulty comodo. To check this, you need to disconnect the output wires and connect them together, if the wipers are functioning, the comodo is responsible for the problem.
  • Finally, last possibility, the front wipers of your Mercedes Cla are blocked as a result of a power failure, so you will have to verify two parts, the relay and the fuse.

Why is the rear window wiper on my Mercedes Cla stuck?

Concerning the stuck rear window wiper of your Mercedes Cla , the origins of your complications are more or less the same. Nevertheless there is only one wiper blade at the rear of your motor vehicle, there are still some dedicated parts that can bring about complications only on the rear windshield of your Mercedes Cla. So, make sure you carry out the same inspections as discovered in the previous component of this content.

What can I do to unlock the wiper on my Mercedes Cla?

Finally, to do this second section, we will see what solutions are available to you to make certain that the wipers on your Mercedes Cla are unlocked and that they work properly again.

How to unlock the wipers of my Mercedes Cla?

If it is for the front windshield wipers or the rear windshield wiper, the solutions will be the same and we will detail them one after the other in this component, it is up to you to adapt them to the component that concerns you. If you have other blocking complications such as a fuel door stuck on Mercedes Cla, do not think twice to seek advice from our article on this problem.

  • In such a case, you will have to identify the engine, then disconnect the power cables of this one (be careful there must be some of them related to the different speeds of sweeping), then remove the brushes and the linkage. Finally, you will have to unscrew these anchoring points which are generally fixed on silentblocks and reassemble a new wiper motor on your Mercedes Cla
  • .

  • In this situation, it will be quite simple but expensive to replace your commodo, the component generally costs around 200€, once tested you will have the ability to disassemble your commodo by removing the cover from the back of the steering wheel then disconnecting it and removing it with the fixing screws, you will just have to reassemble the new one.
  • Mercedes Cla wiper blocked due to a power failure: In this last situation, you will have to identify the origin of the failure (fuse or relay) and replace the faulty component

.

If you need more guides on the Mercedes Cla, go to our Mercedes Cla category.