We will try again today to help you to solve the small complications associated with your motor vehicle. We have recently discovered how to unblock a fuel door, or a tank cap, today we will look into an irritating issue that can be dangerous in bad weather conditions, being a victim of wiper stuck on CUPRA FORMENTOR . And to answer this, we will first try to discover why the wipers on your CUPRA FORMENTOR remain stuck and, secondly, how to unblock them.

wiper-stuck-cupra-formentor

Why does the wiper of my CUPRA FORMENTOR stay stuck?

So we will start our content page with the reasons of the stuck wipers of your CUPRA FORMENTOR . To begin with we will look into the front wipers and in a second time on the rear wiper.

Why are the front wipers on my CUPRA FORMENTOR stuck in up or down position?

We will proceed through one at a time the different complications that can trigger the front wipers of your CUPRA FORMENTOR to get stuck :

  • One of the most common motives of front wipers getting stuck on your CUPRA FORMENTOR is associated with the engine unit that drives them, in reality, these engines can, with time, lose power, and eventually need to be changed. You should find out before the total blockage of your windshield wipers that they work much slower.
  • Less common, but it can still happen, is that your front wiper blades are blocked because of an object that prevents the blades from working, have a look up to the axis of the blades.
  • If it is a lack of lubrication, you will discover that your front wipers are going slower, verify quickly the cause of the problems or else the engines will be forced and damaged.
  • It is possible that the front wipers of your CUPRA FORMENTOR may not work because of a faulty comodo. To check this, you need to disconnect the output wires and connect them together, if the wipers are working, the comodo is responsible for the problem.
  • Finally, last possibility, the front wipers of your CUPRA FORMENTOR are blocked because of a power failure, so you will have to verify two parts, the relay and the fuse.

Why is the rear window wiper on my CUPRA FORMENTOR stuck?

Concerning the stuck rear window wiper of your CUPRA FORMENTOR , the origins of your problems are more or less the same. Although there is just one wiper blade at the rear of your motor vehicle, there are still some dedicated parts that can trigger complications just on the rear windshield of your CUPRA FORMENTOR. So, remember to accomplish similar investigations as discovered in the previous part of this content page.

What can I do to unlock the wiper on my CUPRA FORMENTOR?

At last, for this second part, we will see what solutions are available to you to make sure that the wipers on your CUPRA FORMENTOR are unlocked and that they work properly again.

How to unlock the wipers of my CUPRA FORMENTOR?

If it is for the front windshield wipers or the rear windshield wiper, the solutions will be similar and we will highlight them one by one in this part, it is up to you to adapt them to the part that concerns you. If you have other blocking complications such as a fuel door stuck on CUPRA FORMENTOR, do not hesitate to seek advice from our article on this issue.

  • In such a case, you will have to find the engine unit, then disconnect the power cables of this one (be cautious there must be some of them associated with the different speeds of sweeping), then take out the brushes and the linkage. At last, you will have to unscrew these anchoring points which are generally fixed on silentblocks and reassemble a new wiper motor on your CUPRA FORMENTOR

    • .

  • In this scenario, it will be quite basic but expensive to replace your commodo, the part generally costs around 200€, once tested you will have the ability to disassemble your commodo by removing the cover from the back of the steering wheel then disconnecting it and removing it with the fixing screws, you will just have to reassemble the new one.
  • CUPRA FORMENTOR wiper blocked due to a power failure: In this last scenario, you will have to find the source of the failure (fuse or relay) and replace the faulty part

.

If perhaps you have any further questions about the CUPRA FORMENTOR, do not hesitate to consult our CUPRA FORMENTOR category.