We will try again in this article to help you to remedy the small problems associated with your motor vehicle. We have recently discovered how to unblock a fuel door, or a tank cap, in this article we will look into an irritating problem that can be dangerous in bad weather conditions, being a victim of wiper stuck on Chrysler Pacifica . And to remedy this, we will first try to discover why the wipers on your Chrysler Pacifica remain stuck and, secondly, how to unblock them.

wiper-stuck-chrysler-pacifica

Why does the wiper of my Chrysler Pacifica stay stuck?

So we will begin our content with the reasons of the stuck wipers of your Chrysler Pacifica . To begin with we will look into the front wipers and in a second time on the rear wiper.

Why are the front wipers on my Chrysler Pacifica stuck in up or down position?

We will go through one after the other the different problems that can cause the front wipers of your Chrysler Pacifica to get stuck :

  • One of the most general motives of front wipers getting stuck on your Chrysler Pacifica is associated with the engine that drives them, in fact, these engines can, over time, lose power, and ultimately need to be changed. You should notice before the total blockage of your windshield wipers that they work much slower.
  • Less general, but it can still happen, is that your front wiper blades are blocked as a result of an object that prevents the blades from working, examine up to the axis of the blades.
  • If it is a lack of lubrication, you will discover that your front wipers are going slower, verify quickly the cause of the problems or else the engines will be forced and damaged.
  • It is possible that the front wipers of your Chrysler Pacifica may not operate as a result of a defective comodo. To evaluate this, you need to disconnect the output wires and connect them together, if the wipers are working, the comodo is to blame for the problem.
  • Finally, last opportunity, the front wipers of your Chrysler Pacifica are blocked as a result of a power failure, so you will have to verify two parts, the relay and the fuse.

Why is the rear window wiper on my Chrysler Pacifica stuck?

Concerning the stuck rear window wiper of your Chrysler Pacifica , the roots of your complications are more or less the same. Nevertheless there is only one wiper blade at the rear of your motor vehicle, there are still some dedicated parts that can cause problems only on the rear windshield of your Chrysler Pacifica. So, make sure you carry out the same checks as discovered in the previous part of this content.

What can I do to unlock the wiper on my Chrysler Pacifica?

Finally, for this second part, we will see what solutions are available to you to ensure that the wipers on your Chrysler Pacifica are unlocked and that they operate effectively again.

How to unlock the wipers of my Chrysler Pacifica?

If it is for the front windshield wipers or the rear windshield wiper, the solutions will be the same and we will detail them one after the other in this part, it is up to you to adapt them to the part that concerns you. If you have other blocking problems such as a fuel door stuck on Chrysler Pacifica, do not think twice to consult our article on this problem.

  • In this case, you will have to identify the engine, then disconnect the power cables of this one (take care there must be some of them associated with the different speeds of sweeping), then remove the brushes and the linkage. Finally, you will have to unscrew these anchoring points which are generally fixed on silentblocks and reassemble a new wiper motor on your Chrysler Pacifica
  • .

  • In this scenario, it will be quite simple but expensive to replace your commodo, the part generally costs around 200€, once tested you will have the ability to disassemble your commodo by removing the cover from the back of the steering wheel then disconnecting it and removing it with the fixing screws, you will just have to reassemble the new one.
  • Chrysler Pacifica wiper blocked due to a power failure: In this last scenario, you will have to identify the origin of the failure (fuse or relay) and replace the defective part

.

To discover more tips on the Chrysler Pacifica, take a look at the Chrysler Pacifica category.