Nevertheless newer cars are becoming better and better insulated, they are still furnaces throughout summer. One of the easiest techniques to fairly quickly dissipate this heat throughout summer, or help you get eliminate the mist in the winter, is to open your windows when you drive. Nevertheless, in some cases your windows may not open or may get stuck open or close . In this instance, what should I do if I have a window stuck on my Subaru Legacy? This is precisely what we will try to answer today, first we will see the case of a manual window stuck on Subaru Legacy, and secondly the case of a power window.

window-stuck-subaru-legacy

Manual window stuck on Subaru Legacy

The mechanisms between a power window and a manual window are different, nevertheless, if the window of your Subaru Legacy is stuck in the open or closed position , it will not change much on the technical side, but in the open position it is actually more irritating, you risk to have your vehicle stolen, or to endure bad weather and that the inside of your Subaru Legacy moulds or has electrical complications because of humidity.

Why is the manual window of my Subaru Legacy stuck?

If you are in the case where the manual window of your Subaru Legacy is stuck in either the open or closed position, there are two main causes that can describe this blockage:

  • The window regulator cable is tangled or broken: This will prevent the mechanism from raising or bringing down the window.
  • Seals or glass guides are broken: They prevent the glass from moving up and down suitably.

How to open the stuck manual window on my Subaru Legacy?

Now we have discovered why the manual window of your Subaru Legacy is locked in the open or closed position. We will now speak about the solutions available to you so that you can unblock the window of your Subaru Legacy . To do this, you don’t need very advanced mechanical know-how, the manual mechanisms are quite simple. You will have to remove the seal from your door to access the window lifter mechanism. With a visual verify, you will fairly quickly identify if some parts are injured like the window supports or a lever arm, if the cable is tangled or if the rails are broken, which will block the window of your Subaru Legacy. If it’s just the rails you can try to put them back in web site and lubricate it, in any other case you will have to replace the component, for that you will have to first remove the glass carefully to access the mechanisms to be changed properly.

Electric window stuck on Subaru Legacy

Now let’s move on to the most common case, a power window blocked on Subaru Legacy . Obviously, electric windows are actually more difficult than manual windows and therefore actually bring their share of additional complications.

Why is the power window on my Subaru Legacy stuck?

So let’s start with the possible roots of a window blocked on Subaru Legacy:

  • Faulty window winder motors: Obviously, it’s one of the most general causes for window winder failure, as these motors tire over time and can be rendered useless. Generally you can see this because before they let go entirely, they start to tire and the window rises less and less fairly quickly.
  • One of the gears of the window lift system seizes or breaks, in such a case you should notice a particular noise when you press the window lift button.
  • As with the manual window lifter, one of the cables may break or get tangled in the drum of the mechanism, likewise you should notice a noise when activating the window of your Subaru Legacy
  • .

  • The window lift fuse is faulty, so no power supply to the window lift motor of your Subaru Legacy
  • .

  • The switch knob is unplugged or faulty

How do I unlock the stuck power window on my Subaru Legacy?

Now that we have discovered all the possible causes of a window blocked on Subaru Legacy, it’s time to help you correct this issue, here are the different methods you will have the ability to put in web site to unblock the window of your Subaru Legacy:

  • Before you do anything else, carefully remove your door trim to avoid breaking the staples holding it in web site.
  • Once in front of the mechanism, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter verify that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Subaru Legacy, please refer to our content to help you identify it. If your fuse is in good state verify your power supply wires, one of them must be cut
  • .

  • If it is the cable that is twisted, you can try yourself by removing the glass from its brackets to put it back in web site, in any other case it will have to be changed.
  • Regarding the engine unit, a basic original replacement will be the best solution, in fact a dead engine is not recoverable.
  • If it is one of the window supports that is broken on your Subaru Legacy, you can easily change them because they are simply clipped or screwed on your window.
  • Finally, if nothing occurs when you switch on the switch knob and you have checked out all your electrical connections, remove the switch knob to see if it is properly connected or if it is not broken.

There, you now know how to get rid of a window stuck on Subaru Legacy/strong, some repairs are more difficult than others, if you don’t experience able to do them yourself, go to your technician who will have the ability to do them for you.

If you want more tutorials on the Subaru Legacy, go to our Subaru Legacy category.