Although newer vehicles are getting better and better insulated, they are still furnaces throughout summer. One of the easiest ways to quickly dissipate this heat throughout summer, or help you get rid of the mist in the winter, is to open your windows when you drive. However, oftentimes your windows may not open or may get stuck open or close . In such a case, what should I do if I have a window stuck on my Peugeot Bipper? This is precisely what we will try to answer today, first we will find out the case of a manual window stuck on Peugeot Bipper, and secondly the case of a power window.

window-stuck-peugeot-bipper

Manual window stuck on Peugeot Bipper

The mechanisms between a power window and a manual window are different, however, if the window of your Peugeot Bipper is stuck in the open or closed position , it will not change much on the technical side, but in the open position it is necessarily more annoying, you risk to have your vehicle stolen, or to endure bad weather and that the inside of your Peugeot Bipper moulds or has electrical complications due to humidity.

Why is the manual window of my Peugeot Bipper stuck?

If you are in the case where the manual window of your Peugeot Bipper is stuck in either the open or closed position, there are two most important motives that can show you this blockage:

  • The window regulator cable is tangled or damaged: This will prevent the system from elevating or bringing down the window.
  • Seals or glass guides are broken: They prevent the glass from moving up and down correctly.

How to open the stuck manual window on my Peugeot Bipper?

Now we have seen why the manual window of your Peugeot Bipper is locked in the open or closed position. We will now speak about the solutions available to you so that you can unblock the window of your Peugeot Bipper . To do this, you don’t need very advanced mechanical know-how, the manual mechanisms are quite simple. You will have to remove the seal from your door to access the window lifter system. With a visual check, you will quickly detect if some parts are injured like the window supports or a lever arm, if the cable is tangled or if the rails are broken, which will block the window of your Peugeot Bipper. If it’s only the rails you can try to put them back in place and lubricate it, in any other case you will have to replace the part, for that you will have to first remove the glass carefully to access the mechanisms to be repalced properly.

Electric window stuck on Peugeot Bipper

Now let’s proceed to the most general case, a power window blocked on Peugeot Bipper . Obviously, electric windows are necessarily more difficult than manual windows and therefore necessarily bring their share of additional complications.

Why is the power window on my Peugeot Bipper stuck?

So let’s begin with the possible roots of a window blocked on Peugeot Bipper:

  • Faulty window winder motors: Obviously, it’s one of the most basic reasons for window winder failure, as these motors tire with time and can be rendered useless. In general you can find out this because before they resign totally, they begin to tire and the window rises less and less quickly.
  • One of the gears of the window lift system seizes or breaks, in such a case you should notice a specific noise when you press the window lift button.
  • As with the manual window lifter, one of the cables may break or get tangled in the drum of the system, furthermore you should notice a noise when activating the window of your Peugeot Bipper
  • .

  • The window lift fuse is faulty, so no power supply to the window lift motor of your Peugeot Bipper
  • .

  • The switch knob is unplugged or defective

How do I unlock the stuck power window on my Peugeot Bipper?

Now that we have seen all the possible causes of a window blocked on Peugeot Bipper, it’s time to help you fix this trouble, here are the different measures you will be able to put in place to unblock the window of your Peugeot Bipper:

  • Before you do anything else, carefully remove your door trim to avoid breaking the staples holding it in place.
  • Once in front of the system, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter check that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Peugeot Bipper, please refer to our article to help you identify it. If your fuse is in good state examine your power supply wires, one of them must be cut
  • .

  • If it is the cable that is twisted, you can try yourself by removing the glass from its brackets to put it back in place, in any other case it will have to be changed.
  • Regarding the engine, a simple original replacement will be the best remedy, in fact a dead engine unit is not recoverable.
  • If it is one of the window supports that is broken on your Peugeot Bipper, you can easily change them because they are just clipped or screwed on your window.
  • Finally, if nothing happens when you activate the switch knob and you have checked out all your electrical connections, remove the switch knob to find out if it is properly connected or if it is not broken.

There, you now know how to get rid of a window stuck on Peugeot Bipper/strong, some repairs are more difficult than others, if you don’t experience able to do them yourself, go to your auto technician who will be able to do them for you.

If you wish more guides on the Peugeot Bipper, go to our Peugeot Bipper category.