Although newer automobiles are getting better and better insulated, they are still furnaces during the summer. One of the simplest methods to quickly dissipate this heat during the summer, or help you get rid of the mist in the winter, is to open your windows when you drive. Nevertheless, in some cases your windows may not open or may get stuck open or close . In such a case, what should I do if I have a window stuck on my Mitsubishi Pajero? This is precisely what we will try to answer today, first we will see the case of a manual window stuck on Mitsubishi Pajero, and secondly the case of a power window.

window-stuck-mitsubishi-pajero

Manual window stuck on Mitsubishi Pajero

The mechanisms between a power window and a manual window are different, nevertheless, if the window of your Mitsubishi Pajero is stuck in the open or closed position , it will not change much on the technical side, but in the open position it is necessarily more annoying, you risk to have your vehicle stolen, or to go through bad weather and that the inside of your Mitsubishi Pajero moulds or has electrical complications because of humidity.

Why is the manual window of my Mitsubishi Pajero stuck?

If you are in the case where the manual window of your Mitsubishi Pajero is stuck in either the open or closed position, there are two most important reasons that can explain this blockage:

  • The window regulator cable is tangled or broken: This will prevent the mechanism from raising or bringing down the window.
  • Seals or glass guides are broken: They prevent the glass from moving up and down suitably.

How to open the stuck manual window on my Mitsubishi Pajero?

Now we have seen why the manual window of your Mitsubishi Pajero is locked in the open or closed position. We will now speak about the answers available to you so that you can unblock the window of your Mitsubishi Pajero . To get this done, you don’t need very advanced mechanical know-how, the manual mechanisms are actually quite basic. You will have to take out the seal from your door to access the window lifter mechanism. With a visual check, you will quickly detect if some parts are damaged like the window supports or a lever arm, if the cable is tangled or if the rails are broken, which will block the window of your Mitsubishi Pajero. If it’s only the rails you can try to put them back in place and lubricate it, in any other case you will have to replace the part, for that you will have to first take out the glass cautiously to access the mechanisms to be repalced properly.

Electric window stuck on Mitsubishi Pajero

Now let’s proceed to the most known case, a power window blocked on Mitsubishi Pajero . In truth, electric windows are necessarily more difficult than manual windows and therefore necessarily bring their share of additional complications.

Why is the power window on my Mitsubishi Pajero stuck?

So let’s start with the possible origins of a window blocked on Mitsubishi Pajero:

  • Faulty window winder motors: In truth, it’s one of the most common reasons for window winder failure, as these motors tire over time and can be rendered useless. In general you can see this because before they resign totally, they start to tire and the window rises less and less quickly.
  • One of the gears of the window lift system seizes or breaks, in such a case you should notice a particular noise when you press the window lift button.
  • As with the manual window lifter, one of the cables may break or get tangled in the drum of the mechanism, furthermore you should notice a noise when activating the window of your Mitsubishi Pajero
  • .

  • The window lift fuse is faulty, so no power supply to the window lift motor of your Mitsubishi Pajero
  • .

  • The switch knob is unplugged or defective

How do I unlock the stuck power window on my Mitsubishi Pajero?

Now that we have seen all the possible motives of a window blocked on Mitsubishi Pajero, it’s time to help you correct this trouble, on this website are the different techniques you will be able to put in place to unblock the window of your Mitsubishi Pajero:

  • Before you do anything else, cautiously take out your door trim to avoid breaking the staples holding it in place.
  • Once in front of the mechanism, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter check that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Mitsubishi Pajero, please refer to our article to help you locate it. If your fuse is in good condition verify your power supply wires, one of them must be cut
  • .

  • If it is the cable that is twisted, you can try yourself by removing the glass from its brackets to put it back in place, in any other case it will have to be changed.
  • Regarding the engine unit, a basic original replacement will be the best solution, in fact a dead engine unit is not recoverable.
  • If it is one of the window supports that is broken on your Mitsubishi Pajero, you can easily change them because they are simply clipped or screwed on your window.
  • Finally, if nothing occurs when you switch on the switch knob and you have examined all your electrical connections, remove the switch knob to see if it is effectively connected or if it is not broken.

There, you now know how to get rid of a window stuck on Mitsubishi Pajero/strong, some repairs are more difficult than others, if you don’t feel able to do them yourself, go to your mechanic who will be able to do them for you.

If perhaps you have any further questions about the Mitsubishi Pajero, do not hesitate to consult our Mitsubishi Pajero category.