Nevertheless newer cars are becoming better and better insulated, they are still get pretty hot throughout summer. One of the most basic techniques to fairly quickly dissipate this heat throughout summer, or help you get rid of the mist in the winter, is to open your windows when you drive. However, often your windows may not open or may get stuck open or close . In this case, what should I do if I have a window stuck on my Jeep Liberty? This is accurately what we will try to answer in this article, first we will see the case of a manual window stuck on Jeep Liberty, and secondly the case of a power window.

window-stuck-jeep-liberty

Manual window stuck on Jeep Liberty

The systems between a power window and a manual window are different, however, if the window of your Jeep Liberty is stuck in the open or closed position , it will not replace much on the technical side, but in the open position it is actually more frustrating, you risk to have your vehicle stolen, or to go through bad weather and that the inside of your Jeep Liberty moulds or has electrical complications due to humidity.

Why is the manual window of my Jeep Liberty stuck?

If you are in the case where the manual window of your Jeep Liberty is stuck in either the open or closed position, there are two main motives that can show you this blockage:

  • The window regulator cable is tangled or damaged: This will prevent the system from elevating or bringing down the window.
  • Seals or glass guides are damaged: They prevent the glass from moving up and down optimally.

How to open the stuck manual window on my Jeep Liberty?

Now we have seen why the manual window of your Jeep Liberty is locked in the open or closed position. We will now speak about the answers available to you so that you can unblock the window of your Jeep Liberty . To get this done, you don’t need very advanced mechanical expertise, the manual mechanisms are actually quite simple. You will have to take out the seal from your door to access the window lifter system. With a visual check, you will fairly quickly notice if some elements are broken like the window supports or a lever arm, if the cable is tangled or if the rails are damaged, which will block the window of your Jeep Liberty. If it’s just the rails you can try to put them back in place and lubricate it, otherwise you will have to replace the part, for that you will have to first take out the glass attentively to access the systems to be changed carefully.

Electric window stuck on Jeep Liberty

Now let’s move on to the most basic case, a power window blocked on Jeep Liberty . In fact, electric windows are actually more complex than manual windows and therefore actually bring their share of additional complications.

Why is the power window on my Jeep Liberty stuck?

So let’s start with the possible roots of a window blocked on Jeep Liberty:

  • Defective window winder motors: In fact, it’s one of the most basic reasons for window winder failure, as these motors tire over time and can be rendered useless. Generally you can see this because before they let go entirely, they start to tire and the window rises less and less fairly quickly.
  • One of the gears of the window lift system seizes or breaks, in such a case you should notice a specific noise when you press the window lift button.
  • As with the manual window lifter, one of the cables may break or get tangled in the drum of the system, furthermore you should notice a noise when activating the window of your Jeep Liberty
  • .

  • The window lift fuse is faulty, so no power supply to the window lift motor of your Jeep Liberty
  • .

  • The switch knob is unplugged or defective

How do I unlock the stuck power window on my Jeep Liberty?

Now that we have seen all the possible causes of a window blocked on Jeep Liberty, it’s time to help you correct this issue, here are the different procedures you will be able to put in place to unblock the window of your Jeep Liberty:

  • Before you do anything else, attentively take out your door trim to avoid breaking the staples holding it in place.
  • Once in front of the system, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter check that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Jeep Liberty, please refer to our content page to help you identify it. If your fuse is in good condition examine your power supply wires, one of them must be cut
  • .

  • If it is the cable that is tangled, you can try yourself by removing the glass from its brackets to put it back in place, otherwise it will have to be changed.
  • Concerning the engine, a basic original replacement will be the best remedy, in truth a dead engine is not recoverable.
  • If it is one of the window supports that is broken on your Jeep Liberty, you can easily replace them because they are simply clipped or screwed on your window.
  • Finally, if nothing occurs when you switch on the switch knob and you have checked all your electrical connections, remove the switch knob to see if it is effectively connected or if it is not damaged.

There, you now know how to get rid of a window stuck on Jeep Liberty/strong, some repairs are more complex than others, if you don’t experience able to do them yourself, go to your auto technician who will be able to do them for you.

If perhaps you have any additional questions about the Jeep Liberty, do not hesitate to consult our Jeep Liberty category.