Window stuck on Hyundai Santa Fe, what can I do ?

Although newer automobiles are getting better and better insulated, they are still get pretty hot throughout summer. One of the most basic methods to fairly quickly dissipate this heat throughout summer, or help you get rid of the mist in the winter, is to open your windows when you drive. However, often your windows may not open or may get stuck open or close . In such a case, what should I do if I have a window stuck on my Hyundai Santa Fe? This is exactly what we will try to answer in this article, first we will find out the case of a manual window stuck on Hyundai Santa Fe, and secondly the case of a power window.

Manual window stuck on Hyundai Santa Fe

The systems between a power window and a manual window are different, nevertheless, if the window of your Hyundai Santa Fe is stuck in the open or closed position , it will not replace much on the technical side, but in the open position it is necessarily more frustrating, you risk to have your vehicle stolen, or to endure bad weather and that the inside of your Hyundai Santa Fe moulds or has electrical problems as a result of humidity.

Why is the manual window of my Hyundai Santa Fe stuck?

If you are in the case where the manual window of your Hyundai Santa Fe is stuck in either the open or closed position, there are two main causes that can explain this blockage:

• The window regulator cable is tangled or broken: This will prevent the mechanism from raising or lowering the window.
• Seals or glass guides are damaged: They prevent the glass from moving up and down suitably.

How to open the stuck manual window on my Hyundai Santa Fe?

Now we have seen why the manual window of your Hyundai Santa Fe is locked in the open or closed position. We will now focus on the alternatives available to you so that you can unblock the window of your Hyundai Santa Fe . To do this, you don’t need very advanced mechanical expertise, the manual mechanisms are quite very easy. You will have to remove the seal from your door to access the window lifter mechanism. With a visual check, you will fairly quickly notice if some parts are damaged like the window supports or a lever arm, if the cable is tangled or if the rails are damaged, which will block the window of your Hyundai Santa Fe. If it’s only the rails you can try to put them back in place and lubricate it, otherwise you will have to replace the part, for that you will have to first remove the glass attentively to access the systems to be changed carefully.

Electric window stuck on Hyundai Santa Fe

Now let’s move on to the most common case, a power window blocked on Hyundai Santa Fe . In actual fact, electric windows are necessarily more complex than manual windows and consequently necessarily bring their share of additional problems.

Why is the power window on my Hyundai Santa Fe stuck?

So let’s start with the possible roots of a window blocked on Hyundai Santa Fe:

• Defective window winder motors: In actual fact, it’s one of the most basic reasons for window winder failure, as these motors tire with time and can be rendered useless. Generally you can find out this because before they resign totally, they start to tire and the window rises less and less fairly quickly.
• One of the gears of the window lift system seizes or breaks, in such a case you should notice a specific noise when you press the window lift button.
• As with the manual window lifter, one of the cables may break or get tangled in the drum of the mechanism, likewise you should notice a noise when activating the window of your Hyundai Santa Fe

.

• The window lift fuse is defective, so no power supply to the window lift motor of your Hyundai Santa Fe

.

• The switch knob is unplugged or faulty

How do I unlock the stuck power window on my Hyundai Santa Fe?

Now that we have seen all the possible causes of a window blocked on Hyundai Santa Fe, it’s time to help you resolve this problem, here are the different procedures you will be able to put in place to unblock the window of your Hyundai Santa Fe:

• Before you do anything else, attentively remove your door trim to avoid breaking the staples holding it in place.
• Once in front of the mechanism, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter check that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Hyundai Santa Fe, please refer to our article to help you find it. If your fuse is in good condition verify your power supply wires, one of them must be cut

.

• If it is the cable that is tangled, you can try yourself by removing the glass from its brackets to put it back in place, otherwise it will have to be changed.
• Concerning the engine, a simple original replacement will be the best solution, in truth a dead engine is not recoverable.
• If it is one of the window supports that is broken on your Hyundai Santa Fe, you can easily replace them because they are just clipped or screwed on your window.
• Finally, if nothing comes about when you switch on the switch knob and you have checked all your electrical connections, remove the switch knob to find out if it is properly connected or if it is not damaged.

There, you now know how to get rid of a window stuck on Hyundai Santa Fe/strong, some repairs are more complex than others, if you don’t experience able to do them yourself, go to your technician who will be able to do them for you.