Nevertheless newer cars are becoming better and better insulated, they are still furnaces during the summer. One of the simplest methods to quickly dissipate this heat during the summer, or help you get eliminate the mist in the winter, is to open your windows when you drive. Nevertheless, in some cases your windows may not open or may get stuck open or close . In this case, what should I do if I have a window stuck on my Hyundai Ix35? This is precisely what we will try to answer today, first we will see the case of a manual window stuck on Hyundai Ix35, and secondly the case of a power window.

window-stuck-hyundai-ix35

Manual window stuck on Hyundai Ix35

The mechanisms between a power window and a manual window are different, nevertheless, if the window of your Hyundai Ix35 is stuck in the open or closed position , it will not replace much on the technical side, but in the open position it is actually more frustrating, you risk to have your vehicle stolen, or to have problems with bad weather and that the inside of your Hyundai Ix35 moulds or has electrical problems as a result of humidity.

Why is the manual window of my Hyundai Ix35 stuck?

If you are in the case where the manual window of your Hyundai Ix35 is stuck in either the open or closed position, there are two most important causes that can explain this blockage:

  • The window regulator cable is tangled or damaged: This will prevent the mechanism from raising or bringing down the window.
  • Seals or glass guides are damaged: They prevent the glass from moving up and down suitably.

How to open the stuck manual window on my Hyundai Ix35?

Now we have seen why the manual window of your Hyundai Ix35 is locked in the open or closed position. We will now speak about the alternatives available to you so that you can unblock the window of your Hyundai Ix35 . To get this done, you don’t need very advanced mechanical knowledge, the manual mechanisms are actually quite very easy. You will have to remove the seal from your door to access the window lifter mechanism. With a visual verify, you will quickly identify if some elements are broken like the window supports or a lever arm, if the cable is tangled or if the rails are damaged, which will block the window of your Hyundai Ix35. If it’s just the rails you can try to put them back in web site and lubricate it, in any other case you will have to replace the component, for that you will have to first remove the glass cautiously to access the mechanisms to be repalced properly.

Electric window stuck on Hyundai Ix35

Now let’s proceed to the most known case, a power window blocked on Hyundai Ix35 . In actual fact, electric windows are actually more complex than manual windows and consequently actually bring their share of additional problems.

Why is the power window on my Hyundai Ix35 stuck?

So let’s begin with the possible origins of a window blocked on Hyundai Ix35:

  • Defective window winder motors: In actual fact, it’s one of the most basic causes for window winder failure, as these motors tire with time and can be rendered useless. Generally speaking you can see this because before they let go totally, they begin to tire and the window rises less and less quickly.
  • One of the gears of the window lift system seizes or breaks, in such a case you should hear a particular noise when you press the window lift button.
  • As with the manual window lifter, one of the cables may break or get tangled in the drum of the mechanism, also you should hear a noise when activating the window of your Hyundai Ix35
  • .

  • The window lift fuse is defective, so no power supply to the window lift motor of your Hyundai Ix35
  • .

  • The switch knob is unplugged or defective

How do I unlock the stuck power window on my Hyundai Ix35?

Now that we have seen all the possible motives of a window blocked on Hyundai Ix35, it’s time to help you fix this issue, here are the different methods you will have the ability to put in web site to unblock the window of your Hyundai Ix35:

  • Before you do anything else, cautiously remove your door trim to avoid breaking the staples holding it in web site.
  • Once in front of the mechanism, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter verify that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Hyundai Ix35, please refer to our article to help you find it. If your fuse is in good state examine your power supply wires, one of them must be cut
  • .

  • If it is the cable that is tangled, you can try yourself by removing the glass from its brackets to put it back in web site, in any other case it will have to be changed.
  • Regarding the engine, a basic original replacement will be the best remedy, indeed a dead engine unit is not recoverable.
  • If it is one of the window supports that is broken on your Hyundai Ix35, you can easily replace them because they are simply clipped or screwed on your window.
  • At last, if nothing comes about when you activate the switch knob and you have checked out all your electrical connections, remove the switch knob to see if it is properly connected or if it is not damaged.

There, you now know how to get rid of a window stuck on Hyundai Ix35/strong, some repairs are more complex than others, if you don’t experience able to do them yourself, go to your auto mechanic who will have the ability to do them for you.

If you need more guides on the Hyundai Ix35, go to our Hyundai Ix35 category.