Although newer vehicles are getting better and better insulated, they are still get pretty hot in the summer. One of the easiest methods to quickly dissipate this heat in the summer, or help you get eliminate the mist in the winter, is to open your windows when you drive. Nevertheless, in some cases your windows may not open or may get stuck open or close . In this case, what should I do if I have a window stuck on my Hyundai Bayon? This is exactly what we will try to answer in this article, first we will discover the case of a manual window stuck on Hyundai Bayon, and secondly the case of a power window.

window-stuck-hyundai-bayon

Manual window stuck on Hyundai Bayon

The systems between a power window and a manual window are different, however, if the window of your Hyundai Bayon is stuck in the open or closed position , it will not replace much on the technical side, but in the open position it is actually more irritating, you risk to have your vehicle stolen, or to have problems with bad weather and that the inside of your Hyundai Bayon moulds or has electrical complications as a result of humidity.

Why is the manual window of my Hyundai Bayon stuck?

If you are in the case where the manual window of your Hyundai Bayon is stuck in either the open or closed position, there are two most important motives that can describe this blockage:

  • The window regulator cable is tangled or broken: This will prevent the system from raising or bringing down the window.
  • Seals or glass guides are broken: They prevent the glass from moving up and down optimally.

How to open the stuck manual window on my Hyundai Bayon?

Now we have discovered why the manual window of your Hyundai Bayon is locked in the open or closed position. We will now speak about the solutions available to you so that you can unblock the window of your Hyundai Bayon . To get this done, you don’t need very advanced mechanical understanding, the manual mechanisms are actually quite simple. You will have to take out the seal from your door to access the window lifter system. With a visual check, you will quickly notice if some elements are damaged like the window supports or a lever arm, if the cable is tangled or if the rails are broken, which will block the window of your Hyundai Bayon. If it’s just the rails you can try to put them back in place and lubricate it, otherwise you will have to replace the component, for that you will have to first take out the glass attentively to access the systems to be repalced securely.

Electric window stuck on Hyundai Bayon

Now let’s move on to the most common case, a power window blocked on Hyundai Bayon . In truth, electric windows are actually more difficult than manual windows and consequently actually bring their share of additional complications.

Why is the power window on my Hyundai Bayon stuck?

So let’s begin with the possible origins of a window blocked on Hyundai Bayon:

  • Defective window winder motors: In truth, it’s one of the most common factors for window winder failure, as these motors tire over time and can be rendered useless. In general you can discover this because before they resign totally, they begin to tire and the window rises less and less quickly.
  • One of the gears of the window lift system seizes or breaks, in such a case you should notice a particular noise when you press the window lift button.
  • As with the manual window lifter, one of the cables may break or get tangled in the drum of the system, likewise you should notice a noise when activating the window of your Hyundai Bayon
  • .

  • The window lift fuse is defective, so no power supply to the window lift motor of your Hyundai Bayon
  • .

  • The switch knob is unplugged or faulty

How do I unlock the stuck power window on my Hyundai Bayon?

Now that we have discovered all the possible motives of a window blocked on Hyundai Bayon, it’s time to help you fix this trouble, in this article are the different procedures you will have the ability to put in place to unblock the window of your Hyundai Bayon:

  • Before you do anything else, attentively take out your door trim to avoid breaking the staples holding it in place.
  • Once in front of the system, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter check that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Hyundai Bayon, please refer to our article to help you locate it. If your fuse is in good condition verify your power supply wires, one of them must be cut
  • .

  • If it is the cable that is twisted, you can try yourself by removing the glass from its brackets to put it back in place, otherwise it will have to be changed.
  • Regarding the engine unit, a basic original replacement will be the best solution, in fact a dead engine is not recoverable.
  • If it is one of the window supports that is broken on your Hyundai Bayon, you can easily replace them because they are simply clipped or screwed on your window.
  • At last, if nothing happens when you activate the switch knob and you have checked all your electrical connections, remove the switch knob to discover if it is properly connected or if it is not broken.

There, you now know how to get rid of a window stuck on Hyundai Bayon/strong, some repairs are more difficult than others, if you don’t experience able to do them yourself, go to your auto mechanic who will have the ability to do them for you.

If you want more tutorials on the Hyundai Bayon, go to our Hyundai Bayon category.