Window stuck on Ford Puma, what can I do ?

Although newer vehicles are getting better and better insulated, they are still get pretty hot in the summer. One of the most basic ways to quickly dissipate this heat in the summer, or help you get rid of the mist in the winter, is to open your windows when you drive. However, in some cases your windows may not open or may get stuck open or close . In this instance, what should I do if I have a window stuck on my Ford Puma? This is accurately what we will try to answer today, first we will discover the case of a manual window stuck on Ford Puma, and secondly the case of a power window.

Manual window stuck on Ford Puma

The systems between a power window and a manual window are different, nevertheless, if the window of your Ford Puma is stuck in the open or closed position , it will not change much on the technical side, but in the open position it is necessarily more frustrating, you risk to have your car stolen, or to go through bad weather and that the inside of your Ford Puma moulds or has electrical complications because of humidity.

Why is the manual window of my Ford Puma stuck?

If you are in the case where the manual window of your Ford Puma is stuck in either the open or closed position, there are two main reasons that can explain this blockage:

• The window regulator cable is tangled or destroyed: This will prevent the mechanism from elevating or bringing down the window.
• Seals or glass guides are broken: They prevent the glass from moving up and down optimally.

How to open the stuck manual window on my Ford Puma?

Now we have seen why the manual window of your Ford Puma is locked in the open or closed position. We will now discuss the solutions available to you so that you can unblock the window of your Ford Puma . To do this, you don’t need very advanced mechanical understanding, the manual mechanisms are quite simple. You will have to take out the seal from your door to access the window lifter mechanism. With a visual check, you will quickly detect if some parts are injured like the window supports or a lever arm, if the cable is tangled or if the rails are broken, which will block the window of your Ford Puma. If it’s just the rails you can try to put them back in place and lubricate it, in any other case you will have to replace the component, for that you will have to first take out the glass attentively to access the systems to be repalced properly.

Electric window stuck on Ford Puma

Now let’s move on to the most general case, a power window blocked on Ford Puma . In actual fact, electric windows are necessarily more complex than manual windows and therefore necessarily bring their share of additional complications.

Why is the power window on my Ford Puma stuck?

So let’s start with the possible roots of a window blocked on Ford Puma:

• Defective window winder motors: In actual fact, it’s one of the most common factors for window winder failure, as these motors tire with time and can be rendered useless. Generally speaking you can discover this because before they let go entirely, they start to tire and the window rises less and less quickly.
• One of the gears of the window lift system seizes or breaks, in such a case you should notice a specific noise when you press the window lift button.
• As with the manual window lifter, one of the cables may break or get tangled in the drum of the mechanism, furthermore you should notice a noise when activating the window of your Ford Puma

.

• The window lift fuse is faulty, so no power supply to the window lift motor of your Ford Puma

.

• The switch knob is unplugged or defective

How do I unlock the stuck power window on my Ford Puma?

Now that we have seen all the possible causes of a window blocked on Ford Puma, it’s time to help you resolve this problem, on this website are the different techniques you will be able to put in place to unblock the window of your Ford Puma:

• Before you do anything else, attentively take out your door trim to avoid breaking the staples holding it in place.
• Once in front of the mechanism, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter check that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Ford Puma, please refer to our content to help you find it. If your fuse is in good condition check your power supply wires, one of them must be cut

.

• If it is the cable that is twisted, you can try yourself by removing the glass from its brackets to put it back in place, in any other case it will have to be changed.
• Regarding the engine, a basic original replacement will be the best solution, indeed a dead engine is not recoverable.
• If it is one of the window supports that is broken on your Ford Puma, you can easily change them because they are just clipped or screwed on your window.
• At last, if nothing comes about when you activate the switch knob and you have examined all your electrical connections, remove the switch knob to discover if it is effectively connected or if it is not broken.

There, you now know how to get rid of a window stuck on Ford Puma/strong, some repairs are more complex than others, if you don’t feel able to do them yourself, go to your technician who will be able to do them for you.