Window stuck on Chevrolet Trax, what can I do ?

Nevertheless newer automobiles are getting better and better insulated, they are still get pretty hot in the summer. One of the most basic techniques to fairly quickly dissipate this heat in the summer, or help you get rid of the mist in the winter, is to open your windows when you drive. Nevertheless, in some cases your windows may not open or may get stuck open or close . In this instance, what should I do if I have a window stuck on my Chevrolet Trax? This is accurately what we will try to answer in this article, first we will see the case of a manual window stuck on Chevrolet Trax, and secondly the case of a power window.

Manual window stuck on Chevrolet Trax

The systems between a power window and a manual window are different, nevertheless, if the window of your Chevrolet Trax is stuck in the open or closed position , it will not change much on the technical side, but in the open position it is necessarily more irritating, you risk to have your car stolen, or to endure bad weather and that the inside of your Chevrolet Trax moulds or has electrical problems due to humidity.

Why is the manual window of my Chevrolet Trax stuck?

If you are in the case where the manual window of your Chevrolet Trax is stuck in either the open or closed position, there are two main causes that can describe this blockage:

• The window regulator cable is tangled or broken: This will prevent the mechanism from elevating or lowering the window.
• Seals or glass guides are broken: They prevent the glass from moving up and down suitably.

How to open the stuck manual window on my Chevrolet Trax?

Now we have seen why the manual window of your Chevrolet Trax is locked in the open or closed position. We will now discuss the answers available to you so that you can unblock the window of your Chevrolet Trax . To get this done, you don’t need very advanced mechanical expertise, the manual mechanisms are quite basic. You will have to take out the seal from your door to access the window lifter mechanism. With a visual check, you will fairly quickly notice if some elements are injured like the window supports or a lever arm, if the cable is tangled or if the rails are broken, which will block the window of your Chevrolet Trax. If it’s just the rails you can try to put them back in place and lubricate it, in any other case you will have to replace the component, for that you will have to first take out the glass cautiously to access the systems to be repalced carefully.

Electric window stuck on Chevrolet Trax

Now let’s proceed to the most general case, a power window blocked on Chevrolet Trax . Obviously, electric windows are necessarily more complex than manual windows and therefore necessarily bring their share of additional problems.

Why is the power window on my Chevrolet Trax stuck?

So let’s start with the possible origins of a window blocked on Chevrolet Trax:

• Faulty window winder motors: Obviously, it’s one of the most general causes for window winder failure, as these motors tire over time and can be rendered useless. Generally you can see this because before they resign entirely, they start to tire and the window rises less and less fairly quickly.
• One of the gears of the window lift system seizes or breaks, in this case you should notice a specific noise when you press the window lift button.
• As with the manual window lifter, one of the cables may break or get tangled in the drum of the mechanism, likewise you should notice a noise when activating the window of your Chevrolet Trax

.

• The window lift fuse is defective, so no power supply to the window lift motor of your Chevrolet Trax

.

• The switch knob is unplugged or faulty

How do I unlock the stuck power window on my Chevrolet Trax?

Now that we have seen all the possible causes of a window blocked on Chevrolet Trax, it’s time to help you fix this problem, in this article are the different measures you will have the ability to put in place to unblock the window of your Chevrolet Trax:

• Before you do anything else, cautiously take out your door trim to avoid breaking the staples holding it in place.
• Once in front of the mechanism, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter check that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Chevrolet Trax, please refer to our content to help you find it. If your fuse is in good state verify your power supply wires, one of them must be cut

.

• If it is the cable that is twisted, you can try yourself by removing the glass from its brackets to put it back in place, in any other case it will have to be changed.
• Regarding the engine, a simple original replacement will be the best remedy, obviously a dead engine is not recoverable.
• If it is one of the window supports that is broken on your Chevrolet Trax, you can easily change them because they are simply clipped or screwed on your window.
• At last, if nothing happens when you switch on the switch knob and you have examined all your electrical connections, remove the switch knob to see if it is properly connected or if it is not broken.

There, you now know how to get rid of a window stuck on Chevrolet Trax/strong, some repairs are more complex than others, if you don’t feel able to do them yourself, go to your auto technician who will have the ability to do them for you.