Although newer cars are becoming better and better insulated, they are still furnaces throughout summer. One of the easiest ways to quickly dissipate this heat throughout summer, or help you get eliminate the mist in the winter, is to open your windows when you drive. However, in some cases your windows may not open or may get stuck open or close . In such a case, what should I do if I have a window stuck on my BMW 2 Series? This is precisely what we will try to answer today, first we will discover the circumstance of a manual window stuck on BMW 2 Series, and secondly the circumstance of a power window.

window-stuck-bmw-2-series

Manual window stuck on BMW 2 Series

The mechanisms between a power window and a manual window are different, however, if the window of your BMW 2 Series is stuck in the open or closed position , it will not change much on the technical side, but in the open position it is necessarily more annoying, you risk to have your vehicle stolen, or to go through bad weather and that the inside of your BMW 2 Series moulds or has electrical problems because of humidity.

Why is the manual window of my BMW 2 Series stuck?

If you are in the circumstance where the manual window of your BMW 2 Series is stuck in either the open or closed position, there are two main factors that can describe this blockage:

  • The window regulator cable is tangled or destroyed: This will prevent the system from raising or lowering the window.
  • Seals or glass guides are damaged: They prevent the glass from moving up and down correctly.

How to open the stuck manual window on my BMW 2 Series?

Now we have discovered why the manual window of your BMW 2 Series is locked in the open or closed position. We will now discuss the answers available to you so that you can unblock the window of your BMW 2 Series . To do this, you don’t need very advanced mechanical know-how, the manual mechanisms are actually quite basic. You will have to remove the seal from your door to access the window lifter system. With a visual check, you will quickly identify if some elements are injured like the window supports or a lever arm, if the cable is tangled or if the rails are damaged, which will block the window of your BMW 2 Series. If it’s just the rails you can try to put them back in place and lubricate it, in any other case you will have to replace the part, for that you will have to first remove the glass cautiously to access the mechanisms to be repalced safely.

Electric window stuck on BMW 2 Series

Now let’s move on to the most common circumstance, a power window blocked on BMW 2 Series . In truth, electric windows are necessarily more difficult than manual windows and consequently necessarily bring their share of additional problems.

Why is the power window on my BMW 2 Series stuck?

So let’s start with the possible roots of a window blocked on BMW 2 Series:

  • Defective window winder motors: In truth, it’s one of the most basic reasons for window winder failure, as these motors tire over time and can be rendered useless. Generally speaking you can discover this because before they let go entirely, they start to tire and the window rises less and less quickly.
  • One of the gears of the window lift system seizes or breaks, in this case you should hear a specific noise when you press the window lift button.
  • As with the manual window lifter, one of the cables may break or get tangled in the drum of the system, also you should hear a noise when activating the window of your BMW 2 Series
  • .

  • The window lift fuse is faulty, so no power supply to the window lift motor of your BMW 2 Series
  • .

  • The switch knob is unplugged or defective

How do I unlock the stuck power window on my BMW 2 Series?

Now that we have discovered all the possible causes of a window blocked on BMW 2 Series, it’s time to help you resolve this issue, in this article are the different measures you will have the ability to put in place to unblock the window of your BMW 2 Series:

  • Before you do anything else, cautiously remove your door trim to avoid breaking the staples holding it in place.
  • Once in front of the system, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter check that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your BMW 2 Series, please refer to our article to help you identify it. If your fuse is in good condition examine your power supply wires, one of them must be cut
  • .

  • If it is the cable that is tangled, you can try yourself by removing the glass from its brackets to put it back in place, in any other case it will have to be changed.
  • Regarding the engine unit, a basic original replacement will be the best remedy, in truth a dead engine is not recoverable.
  • If it is one of the window supports that is broken on your BMW 2 Series, you can easily change them because they are simply clipped or screwed on your window.
  • At last, if nothing comes about when you switch on the switch knob and you have checked all your electrical connections, remove the switch knob to discover if it is properly connected or if it is not damaged.

There, you now know how to get rid of a window stuck on BMW 2 Series/strong, some repairs are more difficult than others, if you don’t feel able to do them yourself, go to your mechanic who will have the ability to do them for you.

To discover more tips on the BMW 2 Series, take a look at the BMW 2 Series category.