In this article we’re going to deal with one more topic in the series on car care. This is the coolant level, and more specifically where to put coolant in Tesla Model 3? For this, we will begin this article with a little reminder on the benefit of ensuring of the coolant level of your car, then, where to fill coolant in Tesla Model 3? And, finally, how to make the level of this famous liquid.

put-coolant-tesla-model-3

Why to fill coolant level on a Tesla Model 3?

Before we describe where the coolant is on a Tesla Model 3, we begin our article by reminding you what is the benefit of guaranteeing an ideal coolant level ? The coolant of a Tesla Model 3 has an essential objective in the good functioning of your engine unit, in truth, it will circulate in it to capture the heat made by its process and transfer it to your radiator which has the objective to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine unit would overheat after just a few minutes, and this would end result in engine unit failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops below the minimum level, the circulation of the coolant in the cooling system might be reduced and therefore its performance might be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and cause a leak that can also cause the engine unit to break down.

Where to put the coolant in Tesla Model 3?

We now move on to the step that you are most likely most keen on, where to put coolant in Tesla Model 3? You are now informed of the importance of always having the ideal level of this coolant. To find it is very basic, here are the different steps to allow you to find the expansion tank that contains the coolant of your Tesla Model 3:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly find the expansion tank that contains the coolant of your Tesla Model 3, it is usually found in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Tesla Model 3?

Now that you have identify where the coolant is in your Tesla Model 3 , we will describe how to produce the level of it. Nothing could be simpler, just follow the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Tesla Model 3 the level of the expansion tank. Just check out if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to follow these steps, otherwise the level of your liquid is good enough
  • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Softly add coolant to the expansion tank of your Tesla Model 3 by examining regularly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine unit, and with a syringe, take out the excess coolant.

If the engine unit of your Tesla Model 3 warms up despite a level coolant, go through this article, you will be able to find the causes of this issue.

If perhaps you have any additional questions about the Tesla Model 3, do not hesitate to consult our Tesla Model 3 category.