In this article we’re going to talk about one more topic in the series on motor vehicle care. This is the coolant level, and more specifically where to put coolant in Suzuki Alto? To do this, we will commence this content page with a little reminder on the interest of ensuring of the coolant level of your motor vehicle, then, where to fill coolant in Suzuki Alto? And, finally, how to make the level of this famous liquid.

put-coolant-suzuki-alto

Why to fill coolant level on a Suzuki Alto?

Before we show you where the coolant is on a Suzuki Alto, we commence our article by reminding you what is the interest of guaranteeing an ideal coolant level ? The coolant of a Suzuki Alto has an important function in the good performing of your engine unit, in fact, it will circulate in it to catch the heat produced by its process and transfer it to your radiator which has the objective to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine unit would overheat after just a few minutes, and this would end result in engine unit failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops below the minimal level, the circulation of the coolant in the cooling system might be reduced and therefore its performance might be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine unit to break down.

Where to put the coolant in Suzuki Alto?

We now proceed to the step that you are most likely most enthusiastic about, where to put coolant in Suzuki Alto? You are now aware of the importance of constantly having the ideal level of this coolant. To identify it is very basic, here are the different steps to allow you to find the expansion tank that contains the coolant of your Suzuki Alto:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly identify the expansion tank that contains the coolant of your Suzuki Alto, it is in most cases based in one of the 4 corners of your engine block, to identify it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Suzuki Alto?

Now that you have identify where the coolant is in your Suzuki Alto , we will show you how to produce the level of it. Nothing could be less complicated, just adhere to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Suzuki Alto the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is good enough
  • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Gently add coolant to the expansion tank of your Suzuki Alto by examining frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine unit, and with a syringe, remove the excess coolant.

If the engine unit of your Suzuki Alto warms up despite a level coolant, go through this article, you will be able to find the causes of this issue.

To find more tips on the Suzuki Alto, take a look at the Suzuki Alto category.