In this article we’re going to talk about one more topic in the series on motor vehicle care. This is the coolant level, and more specifically where to put coolant in Ram ProMaster? To do this, we will start this content page with a little reminder on the benefit of ensuring of the coolant level of your motor vehicle, then, where to fill coolant in Ram ProMaster? And, finally, how to make the level of this famous liquid.

put-coolant-ram-promaster

Why to fill coolant level on a Ram ProMaster?

Before we show you where the coolant is on a Ram ProMaster, we start our content page by reminding you what is the benefit of ensuring an ideal coolant level ? The coolant of a Ram ProMaster has a vital function in the good performing of your engine, in fact, it will circulate in it to catch the heat generated by its procedure and transfer it to your radiator which has the mission to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not efficient. Without coolant your engine would overheat after just a few minutes, and this would end result in engine failure, hence the importance of having an ideal coolant level always. If your coolant level drops down below the minimum level, the circulation of the coolant in the cooling system may be reduced and consequently its performance may be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Ram ProMaster?

We now move on to the step that you are most likely most interested in, where to put coolant in Ram ProMaster? You are now aware of the importance of constantly having the ideal level of this coolant. To identify it is very basic, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Ram ProMaster:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly identify the expansion tank that contains the coolant of your Ram ProMaster, it is generally found in one of the 4 corners of your engine block, to identify it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Ram ProMaster?

Now that you have identify where the coolant is in your Ram ProMaster , we will show you how to make the level of it. Nothing could be less complicated, just follow the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Verify on the side of the expansion tank of your Ram ProMaster the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to follow these steps, in any other case the level of your liquid is sufficient

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Gently add coolant to the expansion tank of your Ram ProMaster by looking at repeatedly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine, and with a syringe, take out the excess coolant.

If the engine of your Ram ProMaster warms up despite a level coolant, go through this content page, you will be able to find the causes of this problem.

To discover more tips on the Ram ProMaster, take a look at the Ram ProMaster category.