In this article we’re going to talk about one more subject in the series on car care. This is the coolant level, and more specifically where to put coolant in Ram P/U? For this, we will start this guideline with a little reminder on the benefit of making sure of the coolant level of your car, then, where to fill coolant in Ram P/U? And, finally, how to make the level of this famous liquid.

put-coolant-ram-p/u

Why to fill coolant level on a Ram P/U?

Before we show you where the coolant is on a Ram P/U, we start our article by reminding you what is the benefit of ensuring an ideal coolant level ? The coolant of a Ram P/U has an important objective in the good performing of your engine unit, the truth is, it will circulate in it to catch the heat generated by its procedure and transfer it to your radiator which has the objective to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine unit would overheat after only a few minutes, and this would result in engine unit failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops below the minimal level, the circulation of the coolant in the cooling system may be impaired and consequently its efficiency may be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and trigger a leak that can also trigger the engine unit to break down.

Where to put the coolant in Ram P/U?

We now proceed to the step that you are likely most enthusiastic about, where to put coolant in Ram P/U? You are now conscious of the importance of constantly having the ideal level of this coolant. To find it is very simple, here are the different steps to allow you to discover the expansion tank that contains the coolant of your Ram P/U:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly find the expansion tank that contains the coolant of your Ram P/U, it is in most cases located in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Ram P/U?

Now that you have find out where the coolant is in your Ram P/U , we will show you how to make the level of it. Nothing could be simpler, just adhere to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Ram P/U the level of the expansion tank. Just check out if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to stick to these steps, otherwise the level of your liquid is enough

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Softly add coolant to the expansion tank of your Ram P/U by looking at frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine unit, and with a syringe, take out the excess coolant.

If the engine unit of your Ram P/U warms up despite a level coolant, browse this article, you will have the ability to find the causes of this problem.

If you have any further questions about the Ram P/U, do not hesitate to consult our Ram P/U category.