Today we’re going to discuss one more topic in the series on car care. This is the coolant level, and more specifically where to put coolant in Peugeot Traveller? For this, we will start this content page with a little reminder on the interest of ensuring of the coolant level of your car, then, where to fill coolant in Peugeot Traveller? And, finally, how to make the level of this famous liquid.
Why to fill coolant level on a Peugeot Traveller?
Before we show you where the coolant is on a Peugeot Traveller, we start our article by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Peugeot Traveller has a vital objective in the good functioning of your engine, in fact, it will circulate in it to capture the heat made by its procedure and transfer it to your radiator which has the mission to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine would overheat after only a few minutes, and this would result in engine failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops down below the lowest level, the circulation of the coolant in the cooling system might be reduced and consequently its effectiveness might be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and trigger a leak that can also trigger the engine to break down.
Where to put the coolant in Peugeot Traveller?
We now proceed to the step that you are almost certainly most enthusiastic about, where to put coolant in Peugeot Traveller? You are now aware of the importance of constantly having the ideal level of this coolant. To locate it is very simple, here are the different steps to allow you to discover the expansion tank that contains the coolant of your Peugeot Traveller:
- Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
- Pop the hood of your car.
- You must quickly locate the expansion tank that contains the coolant of your Peugeot Traveller, it is generally located in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.
How to fill up the coolant level on a Peugeot Traveller?
Now that you have identify where the coolant is in your Peugeot Traveller , we will show you how to produce the level of it. Nothing could be simpler, just stick to the few steps down below:
- Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
- Verify on the side of the expansion tank of your Peugeot Traveller the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to follow these steps, otherwise the level of your liquid is good enough
- After waiting for the engine to cool down, you can open the coolant cap of your car.
- Carefully add coolant to the expansion tank of your Peugeot Traveller by looking at regularly.
- Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
- If you’re on top of it, don’t begin your engine, and with a syringe, remove the excess coolant.
.
If the engine of your Peugeot Traveller warms up despite a level coolant, browse this article, you will be able to find the causes of this problem.
If perhaps you have any further questions about the Peugeot Traveller, do not hesitate to consult our Peugeot Traveller category.
