In this article we’re going to tackle one more theme in the series on motor vehicle care. This is the coolant level, and more specifically where to put coolant in Peugeot 5008? For this, we will begin this article with a little reminder on the benefit of ensuring of the coolant level of your motor vehicle, then, where to fill coolant in Peugeot 5008? And, finally, how to make the level of this famous liquid.

put-coolant-peugeot-5008

Why to fill coolant level on a Peugeot 5008?

Before we describe where the coolant is on a Peugeot 5008, we begin our content page by reminding you what is the benefit of ensuring an ideal coolant level ? The coolant of a Peugeot 5008 has an essential objective in the good functioning of your engine unit, in fact, it will circulate in it to capture the heat produced by its process and transfer it to your radiator which has the objective to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine unit would overheat after just a few minutes, and this would end result in engine unit failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops down below the lowest level, the circulation of the coolant in the cooling system might be bothered and consequently its effectiveness might be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and trigger a leak that can also trigger the engine unit to break down.

Where to put the coolant in Peugeot 5008?

We now move on to the step that you are most likely most enthusiastic about, where to put coolant in Peugeot 5008? You are now informed of the importance of always having the ideal level of this coolant. To find it is very simple, here are the different steps to allow you to discover the expansion tank that contains the coolant of your Peugeot 5008:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly find the expansion tank that contains the coolant of your Peugeot 5008, it is generally based in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Peugeot 5008?

Now that you have find out where the coolant is in your Peugeot 5008 , we will describe how to make the level of it. Nothing could be less complicated, just stick to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Verify on the side of the expansion tank of your Peugeot 5008 the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to follow these steps, in any other case the level of your liquid is sufficient
  • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Carefully add coolant to the expansion tank of your Peugeot 5008 by examining regularly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine unit, and with a syringe, remove the excess coolant.

If the engine unit of your Peugeot 5008 warms up despite a level coolant, read this content page, you will have the ability to find the causes of this issue.

In the event that you have any additional questions about the Peugeot 5008, do not hesitate to consult our Peugeot 5008 category.