Today we’re going to deal with one more subject in the series on car care. This is the coolant level, and more specifically where to put coolant in Peugeot 208? For this, we will commence this content with a little reminder on the interest of making sure of the coolant level of your car, then, where to fill coolant in Peugeot 208? And, finally, how to make the level of this famous liquid.

put-coolant-peugeot-208

Why to fill coolant level on a Peugeot 208?

Before we explain where the coolant is on a Peugeot 208, we commence our content page by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Peugeot 208 has an important action in the good functioning of your engine, in reality, it will circulate in it to capture the heat made by its procedure and transfer it to your radiator which has the objective to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine would overheat after just a few minutes, and this would result in engine failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops down below the lowest level, the circulation of the coolant in the cooling system may be reduced and consequently its efficiency may be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine to break down.

Where to put the coolant in Peugeot 208?

We now move on to the step that you are most likely most enthusiastic about, where to put coolant in Peugeot 208? You are now aware of the importance of constantly having the ideal level of this coolant. To find it is very very easy, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Peugeot 208:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly find the expansion tank that contains the coolant of your Peugeot 208, it is in most cases based in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Peugeot 208?

Now that you have find out where the coolant is in your Peugeot 208 , we will explain how to make the level of it. Nothing could be less complicated, just adhere to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Peugeot 208 the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to follow these steps, otherwise the level of your liquid is sufficient

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Gently add coolant to the expansion tank of your Peugeot 208 by looking at regularly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine, and with a syringe, take out the excess coolant.

If the engine of your Peugeot 208 warms up despite a level coolant, read this content page, you will have the ability to find the causes of this issue.

If you need more tutorials on the Peugeot 208, go to our Peugeot 208 category.