In this article we’re going to discuss one more matter in the series on motor vehicle care. This is the coolant level, and more specifically where to put coolant in Peugeot 106? For this, we will commence this article with a little reminder on the benefit of making sure of the coolant level of your motor vehicle, then, where to fill coolant in Peugeot 106? And, at last, how to make the level of this famous liquid.

put-coolant-peugeot-106

Why to fill coolant level on a Peugeot 106?

Before we describe where the coolant is on a Peugeot 106, we commence our content page by reminding you what is the benefit of ensuring an ideal coolant level ? The coolant of a Peugeot 106 has an important objective in the good performing of your engine, in fact, it will circulate in it to capture the heat made by its procedure and transfer it to your radiator which has the mission to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine would overheat after just a few minutes, and this would end result in engine failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops below the lowest level, the circulation of the coolant in the cooling system might be reduced and therefore its performance might be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Peugeot 106?

We now move on to the step that you are most certainly most enthusiastic about, where to put coolant in Peugeot 106? You are now aware of the importance of constantly having the ideal level of this coolant. To locate it is very basic, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Peugeot 106:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly locate the expansion tank that contains the coolant of your Peugeot 106, it is generally found in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Peugeot 106?

Now that you have find out where the coolant is in your Peugeot 106 , we will describe how to produce the level of it. Nothing could be easier, just stick to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just cured water with antifreeze added.
  • Verify on the side of the expansion tank of your Peugeot 106 the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is good enough

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Gently add coolant to the expansion tank of your Peugeot 106 by examining frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine, and with a syringe, remove the excess coolant.

If the engine of your Peugeot 106 warms up despite a level coolant, go through this content page, you will be able to find the causes of this problem.

If you have any additional questions about the Peugeot 106, do not hesitate to consult our Peugeot 106 category.