In this article we’re going to discuss one more subject in the series on car care. This is the coolant level, and more specifically where to put coolant in Mercedes Classe A 3? To do this, we will begin this guideline with a little reminder on the benefit of ensuring of the coolant level of your car, then, where to fill coolant in Mercedes Classe A 3? And, finally, how to make the level of this famous liquid.
Why to fill coolant level on a Mercedes Classe A 3?
Before we explain where the coolant is on a Mercedes Classe A 3, we begin our content by reminding you what is the benefit of ensuring an ideal coolant level ? The coolant of a Mercedes Classe A 3 has an important objective in the good functioning of your engine unit, in reality, it will circulate in it to catch the heat made by its procedure and transfer it to your radiator which has the mission to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine unit would overheat after only a few minutes, and this would end result in engine unit failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops below the lowest level, the circulation of the coolant in the cooling system may be impaired and consequently its efficiency may be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine unit to break down.
Where to put the coolant in Mercedes Classe A 3?
We now proceed to the step that you are most likely most interested in, where to put coolant in Mercedes Classe A 3? You are now aware of the importance of always having the ideal level of this coolant. To identify it is very simple, here are the different steps to allow you to discover the expansion tank that contains the coolant of your Mercedes Classe A 3:
- Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
- Pop the hood of your car.
- You must quickly identify the expansion tank that contains the coolant of your Mercedes Classe A 3, it is in most cases located in one of the 4 corners of your engine block, to identify it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.
How to fill up the coolant level on a Mercedes Classe A 3?
Now that you have find out where the coolant is in your Mercedes Classe A 3 , we will explain how to make the level of it. Nothing could be simpler, just stick to the few steps below:
- Buy if you don’t have any coolant in the store, it’s just cured water with antifreeze added.
- Check on the side of the expansion tank of your Mercedes Classe A 3 the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is sufficient
- After waiting for the engine to cool down, you can open the coolant cap of your car.
- Gently add coolant to the expansion tank of your Mercedes Classe A 3 by checking repeatedly.
- Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
- If you’re on top of it, don’t begin your engine unit, and with a syringe, remove the excess coolant.
.
If the engine unit of your Mercedes Classe A 3 warms up despite a level coolant, go through this content, you will be able to find the causes of this problem.
If you want more guides on the Mercedes Classe A 3, go to our Mercedes Classe A 3 category.
