In this article we’re going to talk about one more topic in the series on motor vehicle care. This is the coolant level, and specifically where to put coolant in Mazda CX 7? For this, we will commence this guideline with a little reminder on the interest of making sure of the coolant level of your motor vehicle, then, where to fill coolant in Mazda CX 7? And, finally, how to make the level of this famous liquid.

put-coolant-mazda-cx-7

Why to fill coolant level on a Mazda CX 7?

Before we show you where the coolant is on a Mazda CX 7, we commence our article by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Mazda CX 7 has an essential objective in the good functioning of your engine, in reality, it will circulate in it to capture the heat generated by its procedure and transfer it to your radiator which has the mission to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine would overheat after only a few minutes, and this would result in engine failure, hence the importance of having an ideal coolant level always. If your coolant level drops below the minimal level, the circulation of the coolant in the cooling system may be bothered and consequently its effectiveness may be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Mazda CX 7?

We now move on to the step that you are most likely most interested in, where to put coolant in Mazda CX 7? You are now aware of the importance of always having the ideal level of this coolant. To locate it is very simple, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Mazda CX 7:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly locate the expansion tank that contains the coolant of your Mazda CX 7, it is usually found in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Mazda CX 7?

Now that you have identify where the coolant is in your Mazda CX 7 , we will show you how to produce the level of it. Nothing could be less complicated, just stick to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just cured water with antifreeze added.
  • Verify on the side of the expansion tank of your Mazda CX 7 the level of the expansion tank. Just check out if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to stick to these steps, otherwise the level of your liquid is sufficient

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Carefully add coolant to the expansion tank of your Mazda CX 7 by looking at regularly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine, and with a syringe, remove the excess coolant.

If the engine of your Mazda CX 7 warms up despite a level coolant, browse this article, you will have the ability to find the causes of this issue.

If you want more guides on the Mazda CX 7, go to our Mazda CX 7 category.