Today we’re going to discuss one more matter in the series on car care. This is the coolant level, and more specifically where to put coolant in Jeep Liberty? To do this, we will start this article content with a little reminder on the interest of making sure of the coolant level of your car, then, where to fill coolant in Jeep Liberty? And, at last, how to make the level of this famous liquid.
Why to fill coolant level on a Jeep Liberty?
Before we describe where the coolant is on a Jeep Liberty, we start our content page by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Jeep Liberty has an important action in the good performing of your engine unit, in reality, it will circulate in it to catch the heat produced by its operation and transfer it to your radiator which has the objective to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine unit would overheat after just a few minutes, and this would result in engine unit failure, hence the importance of having an ideal coolant level always. If your coolant level drops below the minimum level, the circulation of the coolant in the cooling system may be reduced and therefore its efficiency may be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine unit to break down.
Where to put the coolant in Jeep Liberty?
We now proceed to the step that you are most certainly most interested in, where to put coolant in Jeep Liberty? You are now informed of the importance of always having the ideal level of this coolant. To find it is very basic, here are the different steps to allow you to find the expansion tank that contains the coolant of your Jeep Liberty:
- Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
- Pop the hood of your car.
- You must quickly find the expansion tank that contains the coolant of your Jeep Liberty, it is generally based in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.
How to fill up the coolant level on a Jeep Liberty?
Now that you have identify where the coolant is in your Jeep Liberty , we will describe how to produce the level of it. Nothing could be simpler, just adhere to the few steps below:
- Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
- Verify on the side of the expansion tank of your Jeep Liberty the level of the expansion tank. Just check out if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to follow these steps, in any other case the level of your liquid is sufficient
- After waiting for the engine to cool down, you can open the coolant cap of your car.
- Carefully add coolant to the expansion tank of your Jeep Liberty by looking at repeatedly.
- Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
- If you’re on top of it, don’t start your engine unit, and with a syringe, take out the excess coolant.
.
If the engine unit of your Jeep Liberty warms up despite a level coolant, read this content page, you will be able to find the causes of this issue.
If perhaps you have any further questions about the Jeep Liberty, do not hesitate to consult our Jeep Liberty category.
