Today we’re going to tackle one more topic in the series on car care. This is the coolant level, and specifically where to put coolant in Hyundai Ix35? To do this, we will start this content page with a little reminder on the interest of ensuring of the coolant level of your car, then, where to fill coolant in Hyundai Ix35? And, finally, how to make the level of this famous liquid.

put-coolant-hyundai-ix35

Why to fill coolant level on a Hyundai Ix35?

Before we explain where the coolant is on a Hyundai Ix35, we start our article by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Hyundai Ix35 has an important action in the good functioning of your engine unit, in reality, it will circulate in it to capture the heat produced by its process and transfer it to your radiator which has the objective to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine unit would overheat after just a few minutes, and this would result in engine unit failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops below the minimum level, the circulation of the coolant in the cooling system might be bothered and therefore its effectiveness might be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine unit to break down.

Where to put the coolant in Hyundai Ix35?

We now move on to the step that you are most likely most enthusiastic about, where to put coolant in Hyundai Ix35? You are now aware of the importance of constantly having the ideal level of this coolant. To identify it is very very easy, here are the different steps to allow you to find the expansion tank that contains the coolant of your Hyundai Ix35:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly identify the expansion tank that contains the coolant of your Hyundai Ix35, it is in most cases based in one of the 4 corners of your engine block, to identify it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Hyundai Ix35?

Now that you have identify where the coolant is in your Hyundai Ix35 , we will explain how to make the level of it. Nothing could be simpler, just follow the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Hyundai Ix35 the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to follow these steps, otherwise the level of your liquid is good enough
  • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Carefully add coolant to the expansion tank of your Hyundai Ix35 by checking repeatedly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine unit, and with a syringe, take out the excess coolant.

If the engine unit of your Hyundai Ix35 warms up despite a level coolant, read this article, you will be able to find the causes of this issue.

In the event that you have any additional questions about the Hyundai Ix35, do not hesitate to consult our Hyundai Ix35 category.