In this article we’re going to tackle one more matter in the series on car care. This is the coolant level, and specifically where to put coolant in Ford Kuga? To do this, we will start this guideline with a little reminder on the interest of making sure of the coolant level of your car, then, where to fill coolant in Ford Kuga? And, at last, how to make the level of this famous liquid.
Why to fill coolant level on a Ford Kuga?
Before we describe where the coolant is on a Ford Kuga, we start our content page by reminding you what is the interest of guaranteeing an ideal coolant level ? The coolant of a Ford Kuga has a vital function in the good performing of your engine unit, in fact, it will circulate in it to capture the heat generated by its process and transfer it to your radiator which has the objective to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine unit would overheat after only a few minutes, and this would result in engine unit failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops down below the minimal level, the circulation of the coolant in the cooling system might be impaired and therefore its effectiveness might be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine unit to break down.
Where to put the coolant in Ford Kuga?
We now proceed to the step that you are almost certainly most enthusiastic about, where to put coolant in Ford Kuga? You are now aware of the importance of always having the ideal level of this coolant. To locate it is very very easy, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Ford Kuga:
- Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
- Pop the hood of your car.
- You must quickly locate the expansion tank that contains the coolant of your Ford Kuga, it is in most cases based in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.
How to fill up the coolant level on a Ford Kuga?
Now that you have identify where the coolant is in your Ford Kuga , we will describe how to produce the level of it. Nothing could be easier, just stick to the few steps down below:
- Buy if you don’t have any coolant in the store, it’s just cured water with antifreeze added.
- Verify on the side of the expansion tank of your Ford Kuga the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is enough
- After waiting for the engine to cool down, you can open the coolant cap of your car.
- Gently add coolant to the expansion tank of your Ford Kuga by looking at repeatedly.
- Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
- If you’re on top of it, don’t start your engine unit, and with a syringe, remove the excess coolant.
.
If the engine unit of your Ford Kuga warms up despite a level coolant, read this content page, you will be able to find the causes of this issue.
To get more tips on the Ford Kuga, take a look at the Ford Kuga category.
