In this article we’re going to tackle one more topic in the series on motor vehicle care. This is the coolant level, and specifically where to put coolant in Fiat Tipo? For this, we will start this content with a little reminder on the interest of making sure of the coolant level of your motor vehicle, then, where to fill coolant in Fiat Tipo? And, finally, how to make the level of this famous liquid.

put-coolant-fiat-tipo

Why to fill coolant level on a Fiat Tipo?

Before we show you where the coolant is on a Fiat Tipo, we start our article by reminding you what is the interest of guaranteeing an ideal coolant level ? The coolant of a Fiat Tipo has an important objective in the good performing of your engine, in reality, it will circulate in it to catch the heat generated by its operation and transfer it to your radiator which has the mission to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine would overheat after just a few minutes, and this would end result in engine failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops down below the minimum level, the circulation of the coolant in the cooling system may be bothered and consequently its efficiency may be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Fiat Tipo?

We now proceed to the step that you are likely most enthusiastic about, where to put coolant in Fiat Tipo? You are now conscious of the importance of always having the ideal level of this coolant. To find it is very simple, here are the different steps to allow you to find the expansion tank that contains the coolant of your Fiat Tipo:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly find the expansion tank that contains the coolant of your Fiat Tipo, it is generally located in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Fiat Tipo?

Now that you have identify where the coolant is in your Fiat Tipo , we will show you how to produce the level of it. Nothing could be less complicated, just adhere to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just cured water with antifreeze added.
  • Check on the side of the expansion tank of your Fiat Tipo the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to stick to these steps, otherwise the level of your liquid is enough

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Gently add coolant to the expansion tank of your Fiat Tipo by examining regularly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine, and with a syringe, take out the excess coolant.

If the engine of your Fiat Tipo warms up despite a level coolant, go through this article, you will be able to find the causes of this problem.

If you wish more tutorials on the Fiat Tipo, go to our Fiat Tipo category.