Today we’re going to deal with one more topic in the series on motor vehicle care. This is the coolant level, and more specifically where to put coolant in Fiat Bravo? For this, we will commence this guideline with a little reminder on the interest of making sure of the coolant level of your motor vehicle, then, where to fill coolant in Fiat Bravo? And, at last, how to make the level of this famous liquid.
Why to fill coolant level on a Fiat Bravo?
Before we explain where the coolant is on a Fiat Bravo, we commence our content by reminding you what is the interest of guaranteeing an ideal coolant level ? The coolant of a Fiat Bravo has a vital objective in the good performing of your engine, the truth is, it will circulate in it to catch the heat made by its procedure and transfer it to your radiator which has the objective to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine would overheat after just a few minutes, and this would result in engine failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops below the minimum level, the circulation of the coolant in the cooling system may be bothered and therefore its efficiency may be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine to break down.
Where to put the coolant in Fiat Bravo?
We now proceed to the step that you are almost certainly most enthusiastic about, where to put coolant in Fiat Bravo? You are now aware of the importance of constantly having the ideal level of this coolant. To find it is very very easy, here are the different steps to allow you to discover the expansion tank that contains the coolant of your Fiat Bravo:
- Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
- Pop the hood of your motor vehicle.
- You must quickly find the expansion tank that contains the coolant of your Fiat Bravo, it is usually found in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.
How to fill up the coolant level on a Fiat Bravo?
Now that you have find out where the coolant is in your Fiat Bravo , we will explain how to produce the level of it. Nothing could be easier, just stick to the few steps below:
- Buy if you don’t have any coolant in the store, it’s just cured water with antifreeze added.
- Verify on the side of the expansion tank of your Fiat Bravo the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to stick to these steps, otherwise the level of your liquid is sufficient
- After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
- Gently add coolant to the expansion tank of your Fiat Bravo by checking regularly.
- Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
- If you’re on top of it, don’t start your engine, and with a syringe, remove the excess coolant.
.
If the engine of your Fiat Bravo warms up despite a level coolant, browse this content, you will be able to find the causes of this problem.
If you wish more guides on the Fiat Bravo, go to our Fiat Bravo category.